User manual DENON AVR-1506

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DENON AVR-1506. We hope that this DENON AVR-1506 user guide will be useful to you.


DENON AVR-1506 : Download the complete user guide (2364 Ko)

You may also download the following manuals related to this product:

   DENON AVR-1506 (4564 ko)

Manual abstract: user guide DENON AVR-1506

Detailed instructions for use are in the User's Guide.

[. . . ] AV SURROUND RECEIVER AVR-1506 OPERATING INSTRUCTIONS MODE D'EMPLOI FRANCAIS 2 SAFETY PRECAUTIONS ENGLISH SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. [. . . ] BackSp" at the "Speaker Configuration" setting to "1sp" or "2sp". · To play in the PLIIx mode, set "Surround Back" at the "Power Amp Assign. " setting. MODE GAME TONE DEFEAT 4 Turn the SELECT knob, and press the CURSOR F or G button to select the optimum mode for the source. DEFAULT SURROUND BACK · When the Dolby Pro Logic mode: MODE DOLBY PL CINEMA EQ TONE DEFEAT When the "SURROUND BACK" parameter is set to "ON". Back" at system setup to "Small" or "Large". ) (Pro Logic IIx Cinema mode) (Pro Logic IIx Music mode) DEFAULT SURROUND BACK 1 Press the STANDARD button to select the Dolby Pro Logic IIx mode. · The Dolby Pro Logic II indicator lights. Lights If you do want the bass and treble to be adjusted, turn off the tone defeat mode. (Pro Logic IIx Game mode) The mode switches as shown below each time the button is pressed. DOLBY PLIIx DTS NEO:6 6 Turn the SELECT knob, and press the CURSOR F or G button to set the various surround parameters. When the "SURROUND BACK" parameter is set to "OFF". Back" at system setup to "None". ) (Pro Logic II Cinema mode) 2 3 Play a program source. (Pro Logic II Music mode) (Pro Logic II Game mode) (Dolby Pro Logic mode) When the surround parameters are set using the buttons on the main unit, stop operating the buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds. · Cinema EQ setting: For operating instructions, refer to the manuals of the respective components. CINEMA EQ OFF ON OFF Press the SURROUND PARAMETER button to select the surround parameter mode. 21 ENGLISH ENGLISH Basic Operation · PANORAMA setting Basic Operation 7 ON OFF Press the ENTER button to finish the surround parameter mode. PANORAMA OFF · DIMENSION setting · When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. DIMENSION 3 0 3 6 2 Surround parameters q Pro Logic IIx and Pro Logic II Mode: The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended for stereo music and surround-encoded stereo music sources. The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source content is not of optimum quality. Select one of the modes ("Cinema", "Music", "Pro Logic" or "Game"). · Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. · Dimension Control: This control gradually adjusts the soundfield either towards the front or towards the rear. · Center Width Control: This control adjusts the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. · CENTER WIDTH setting CENTER WIDTH 3 0 4 7 · TONE DEFEAT setting TONE DEF. ON ON OFF · SURROUND BACK SPEAKER setting SB : ON ON OFF · D. OFF OFF LOW MID HIGH This parameter is displayed during DOLBY DIGITAL playback. · DEFAULT setting DEFAULT YES Y/N Y/N NO Select "YES" to reset to the factory defaults. 22 ENGLISH ENGLISH Basic Operation Basic Operation STANDARD INPUT MODE SELECT · CINEMA EQ setting: INPUT SELECTOR CINEMA EQ OFF ON OFF · CENTER IMAGE setting ENTER STANDARD SURROUND PARAMETER INPUT SELECTOR CURSOR F SURROUND PARAMETER CURSOR G SURROUND BACK C. IMAGE 0. 0 0. 3 0. 3 1. 0 · TONE DEFEAT setting INPUT MODE TONE DEF. ON DTS NEO:6 mode 1 2 3 4 Press the STANDARD button to select the DTS NEO:6 mode. 5 Press the SURROUND PARAMETER button to select the various parameters. ON OFF · SURROUND BACK SPEAKER setting The mode switches as shown below each time the button is pressed. · When the Cinema mode: MODE CINEMA DEFAULT CINEMA EQ TONE DEFEAT SB : ON ON OFF The mode switches as shown below each time the button is pressed. DOLBY PLIIx DTS NEO:6 · D. setting Play a program source. SURROUND BACK · When the Music mode: MODE MUSIC CENTER IMAGE TONE DEFEAT D. COMP. OFF OFF LOW MID HIGH Press the SURROUND PARAMETER button to select the surround parameter mode. MODE cinema DEFAULT SURROUND BACK This parameter is displayed during DOLBY DIGITAL playback. · DEFAULT setting If you do want the bass and treble to be adjusted, turn off the tone defeat mode. Turn the SELECT knob, and press the CURSOR F or G button to select the optimum mode for the source. MODE cinema MODE music 6 Turn the SELECT knob, and press the CURSOR F or G button to set the various surround parameters. DEFAULT YES Y/N Y/N NO Select "YES" to reset to the factory defaults. When the surround parameters are set using the buttons on the main unit, stop operating the buttons after completing the settings. [. . . ] Furthermore, with DTS 96/24 compatible CDs, 88. 2 kHz/24-bit multi-channel surround can be achieved using normal CD/LD players ( 1). Even with the high quality multi-channel signals, the recording time is the same as with conventional DTS surround sources. What's more, DTS 96/24 is fully compatible with the conventional DTS surround format, so DTS 96/24 signal sources can be played with a sampling frequency of 48 kHz or 44. 1 kHz on conventional DTS or DTS-ES surround decoders ( 2). 1 A DVD player with DTS digital output capabilities (for CD/LD players, a player with digital outputs for conventional DTS CDs/LDs) and a disc recorded in DTS 96/24 are required. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DENON AVR-1506




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DENON AVR-1506 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.