User manual DENON AVC-3310 CONTROL PROTOCOL

[. . . ] <Gateway> Set the address of Gateway when Gateway is on the local network. <Network Option: Network Standby Mode> (1)Press MENU button, then Menu appears on FL-display (and GUI) (2)Select "Manual Setup > Network Setup > Other > Network Standby" (3)Set parameters described below. "ON "---Use this setting when using the AVR-3310 connected in a network. "OFF "--- Use this setting when not using the AVR-3310 connected in a network. [. . . ] OFF 120 90 60 30 ? function set AUTO mode (Priority:HDMI>>DIGITAL>>ANALOG) set force HDMI INPUT mode set force DIGITAL INPUT (Optical, Coaxial)mode set force ANALOG INPUT mode ---Set EXT. IN mode Return SD Status set DIGITAL INPUT AUTO mode set DIGITAL INPUT force PCM mode set DIGITAL INPUT force DTS mode Return DC Status VIDEO SELECT mode set , and select source SDAUTO<CR> example SDHDMI<CR> SDDIGITAL<CR> SDANALOG<CR> SDEXT. IN<CR> SD?<CR> DCAUTO<CR> DCPCM<CR> DCDTS<CR> DC?SVDVD<CR> SVHDP<CR> SVTV<CR> SVSAT/CBL<CR> SVVCR<CR> SVDVR<CR> SVV. AUX<CR> SVSOURCE<CR> SV?<CR> SLPOFF<CR> SLP120<CR> SLP90<CR> SLP60<CR> SLP30<CR> SLP?<CR> DC SV SLP VIDEO SELECT mode cancel Return SV Status MAIN ZONE SLEEP TIMER setting Return SLP Status -10- COMMAND MS PARAMETER DIRECT PURE DIRECT STEREO STANDARD DOLBY DIGITAL DTS SUROUND 7CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE MATRIX VIDEO GAME VIRTUAL ?QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK1 MEMORY QUICK2 MEMORY QUICK3 MEMORY QUCIK4 MEMORY QUICK5 MEMORY QUICK ?Select SURROUND mode function Return MS Status QUICK SELECT 1-5 MODE SELECT QUICK SELECT 1-5 MODE MEMORY Return MSQUICK Status example MSDIRECT<CR> MSPURE DIRECT<CR> MSSTEREO<CR> MSSTANDARD<CR> MSDOLBY DIGITAL<CR> MSDTS SURROUND<CR> MS7CH STEREO<CR> MSROCK ARENA<CR> MSJAZZ CLUB<CR> MSMONO MOVIE<CR> MSMATRIX<CR> MSVIDEO GAME<CR> MSVIRTUAL<CR> MS?<CR> MSQUICK1<CR> MSQUICK2<CR> MSQUICK3<CR> MSQUICK4<CR> MSQUICK5<CR> MSQUICK1 MEMORY<CR> MSQUICK2 MEMORY<CR> MSQUICK3 MEMORY<CR> MSQUICK4 MEMORY<CR> MSQUICK5 MEMORY<CR> MSQUICK ?<CR> -11- COMMAND VS PARAMETER ASPNRM ASPFUL ASP ?AUDIO AMP AUDIO TV AUDIO ? function Set Normal mode Set FULL mode Return VSASPECT Status Set Resolution to 480p/576p Set Resolution to 1080i Set Resolution to 720p Set Resolution to 1080p Set Resolution to 1080p:24Hz Set Resolution to AUTO Return VSSC Status Set Resolution to 480p/576p (HDMI) Set Resolution to 1080i(HDMI) Set Resolution to 720p(HDMI) Set Resolution to 1080p(HDMI) Set Resolution to 1080p:24Hz(HDMI) Set Resolution to AUTO(HDMI) Return VSSCH Status(HDMI) Set HDMI AUDIO Output to AMP Set HDMI AUDIO Output to TV Return VSAUDIO Status example VSASPNRM<CR> VSASPFUL<CR> VSASP ?<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSC ?<CR> VSSCH48P<CR> VSSCH10I<CR> VSSCH72P<CR> VSSCH10P<CR> VSSCH10P24<CR> VSSCHAUTO<CR> VSSCH ?<CR> VSAUDIO AMP<CR> VSAUDIO TV<CR> VSAUDIO ?<CR> -12- COMMAND PS PARAMETER TONE CTRL ON TONE CTRL OFF TONE CTRL ?MULTEQ:AUDYSSEY MULTEQ:BYP. LR MULTEQ:FLAT MULTEQ:MANUAL MULTEQ:OFF MULTEQ ? example PARAMETER setting PSTONE CTRL ON<CR> TONE CONTROL ON/OFF PSTONE CTRL OFF<CR> Return PSTONE CONTROL Status PSTONE CTRL ?<CR> SURROUND BACK SP MODE set PSSB:MTRX ON<CR> PSSB:PL2X CINEMA<CR> PSSB:PL2X MUSIC<CR> PSSB:ON<CR> PSSB:OFF<CR> Return PSSB: Status PSSB: ?<CR> CINEMA EQ. ON/OFF PSCINEMA EQ. ON<CR> PSCINEMA EQ. OFF<CR> Return PSCINEMA EQ. Status PSCINEMA EQ. Return PSCEN Status CEI UP CENTER IMAGE UP/DOWN , direct change to **dB CEI DOWN **:00 to 99 by ASCII , 00=0. 0 CEI ** ---AVR-3310/990 can be operated from 0. 0 to 1. 0 CEI?Return PSCEI Status PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) function LFE UP/DOWN , direct change to **dB **:00 to 99 by ASCII , 00=0dB, 10=-10dB ---AVR-3310/990 can be operated from 0 to -10 Return PSLFE Status EFFECT ON/OFF , EFFECT LEVEL direct change to **dB **:00 to 99 by ASCII , 00=0dB, 10=10dB ---AVR-3310 can be operated from 1 to 15 Return PSEFF Status DELAY UP/DOWN , direct change to ***dB ***:000 to 999 by ASCII , 000=0ms, 300=300ms ---AVR-3310/990 can be operated from 0 to 300 0-60ms:3ms/Step Over 60ms:10ms/Step Return PSDEL Status AFDM ON/OFF PSLFE PSLFE PSLFE PSLFE PSEFF PSEFF PSEFF PSEFF PSDEL PSDEL PSDEL PSDEL PSAFD PSAFD PSAFD PSPAN PSPAN PSPAN PSDIM PSDIM PSDIM PSDIM PSCEN PSCEN PSCEN PSCEN PSCEI PSCEI PSCEI OSCEI example UP<CR> DOWN<CR> 10<CR> ?<CR> UP<CR> DOWN<CR> **<CR> ?<CR> UP<CR> DOWN<CR> ***<CR> ?<CR> ON<CR> OFF<CR> ?<CR> ON<CR> OFF<CR> ?<CR> UP<CR> DOWN<CR> **<CR> ?<CR> UP<CR> DOWN<CR> 07<CR> ?<CR> UP<CR> DOWN<CR> 10<CR> ?<CR> -15- COMMAND PS PARAMETER function ATT ON SW ATT ON/OFF ATT OFF ATT ?Return PSSWR Status RSZ S ROOM SIZE direct change RSZ MS RSZ M RSZ ML RSZ L RSZ ?Return PSRSZ Status DELAY UP AUDIO DELAY UP/DOWN , direct change to ***dB DELAY DOWN ***:000 to 999 by ASCII , 000=0ms, 200=200ms DELAY *** ---AVR-3310/990 can be operated from 0 to 200 RSTR OFF AUDIO RESTORER direct change RSTR MODE1 RSTR MODE2 RSTR MODE3 RSTR ?Return PSRSTR Status FRONT SPA FRONT SPEAKER direct change FRONT SPB FRONT A+B FRONT?Return PSFRONT Status PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) example PSATT ON<CR> PSATT OFF<CR> PSATT ?<CR> PSSWR ON<CR> PSSWR OFF<CR> PSSWR ?<CR> PSRSZ S<CR> PSRSZ MS<CR> PSRSZ M<CR> PSRSZ ML<CR> PSRSZ L<CR> PSRSZ ?<CR> PSDELAY UP<CR> PSDELAY DOWN<CR> PSDELAY 200<CR> PSRSTR OFF<CR> PSRSTR MODE1<CR> PSRSTR MODE2<CR> PSRSTR MODE3<CR> PSRSTR ?<CR> PSFRONT SPA<CR> PSFRONT SPB<CR> PSFRONT A+B<CR> PSFRONT?<CR> -16- COMMAND PV function example CN UP CONTRAST UP/DOWN , direct change to **dB PVCN UP<CR> CN DOWN **:44 to 56 by ASCII , 50=0 PVCN DOWN<CR> CN ** ---AVR-3310/990 can be operated from -6 to +6(44 to 56) PVCN 50<CR> CN ?Return PSCN Status PVCN ?<CR> BR UP BRIGHTNESS UP/DOWN , direct change to **dB PVBR UP<CR> BR DOWN **:00 to 12 by ASCII , 00=0 PVBR DOWN<CR> BR ** ---AVR-3310/990 can be operated from 0 to 12 PVBR 12<CR> BR ?Return PSBR Status PVBR ?<CR> CM UP CHROMA LEVEL UP/DOWN , direct change to **dB PVCM UP<CR> CM DOWN **:44 to 56 by ASCII , 50=0 PVCM DOWN<CR> CM ** ---AVR-3310/990 can be operated from -6 to +6(44 to 56) PVCM 50<CR> CM ?Return PSCN Status PVCM ?<CR> HUE UP HUE UP/DOWN , direct change to **dB PVHUE UP<CR> HUE DOWN **:44 to 56 by ASCII , 50=0 PVHUE DOWN<CR> HUE ** ---AVR-3310/990 can be operated from -6 to +6(44 to 56) PVHUE 50<CR> HUE ?Return PSCN Status PVHUE ?<CR> DNR OFF DNR direct change PVDNR OFF<CR> DNR LOW PVDNR LOW<CR> DNR MID PVDNR MID<CR> DNR HI PVHUE HI<CR> DNR ?Return PVDNR Status PVDNR ?<CR> ENH UP ENHANCER UP/DOWN, direct change to **dB PVENH UP<CR> ENH DOWN **:00 to 12 by ASCII, 00=0 PVENH DOWN<CR> ENH ** ---AVR-3310/990 can be operated from 0 to 12 PVENH 12<CR> ENH ?Return PVENH Status PVENH ?<CR> PV COMMAND : "*" parameter uses two ASCII characters. [. . . ] (see page4 J) section) ON OFF ON OFF ST MONO FL ** FR ** ON OFF BAS ** ---Z2 QUICK 1(or 2, 3, 4, 5) Change Z2 QUICK OFF ZONE2 VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 0=-80dB 99 = ---(MIN) ZONE2 ON/OFF change ZONE2 OUTPUT MUTE ON/OFF change example Z2PHONO<CR> | Z2USB DIRECT <CR> Z2SOURCE<CR> Z2QUICK1<CR> Z2QUICK2<CR> Z2QUICK3<CR> Z2QUICK4<CR> Z2QUICK5<CR> Z2QUICK0<CR> Z280<CR> Z2ON<CR> Z2OFF<CR> Z2MUON<CR> Z2MUOFF<CR> Z2CSST<CR> Z2CSMONO<CR> Z2CVFL 50<CR> Z2CVFR 50<CR> Z2HPFON<CR> Z2HPFOFF<CR> Z2PSBAS 00<CR> Z2PSTRE 00<CR> -38- EVENT Z3 PARAMETER PHONO | USB DIRECT SOURCE QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK0 ** function ZONE3 source change ---The name of PARAMETER is the same as that of the time of SI COMMAND. ZONE3 mode cancel ---AVR990:Disable ZONE3 QUICK SELECT mode change ---AVR990:Disable example Z3PHONO<CR> | Z3USB DIRECT<CR> Z3SOURCE<CR> Z3QUICK1<CR> Z3QUICK2<CR> Z3QUICK3<CR> Z3QUICK4<CR> Z3QUICK5<CR> Z3QUICK0<CR> Z380<CR> ---Z3 QUICK 1(or 2, 3, 4, 5) Change Z3 QUICK OFF MULTI ZONE-3 VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00=-80dB 99 = ---(MIN) ---AVR990:Disable ON MULTI ZONE-3 ON/OFF change ---AVR990:Disable OFF Z3MU ON ZONE3 OUTPUT MUTE ON/OFF change ---AVR990:Disable OFF Z3CS ST ZONE3 Channel setting ---AVR990:Disable MONO Z3CV FL ** **:38 to 62 by ASCII , 50=0dB ---AVR990:Disable FR ** **:38 to 62 by ASCII , 50=0dB ---AVR990:Disable Z3HPF ON ZONE3 HPF ON/OFF change OFF ---AVR990:Disable Z3PS BAS ** ZONE3 BASS change ---AVR990:Disable TRE ** ZONE3 TEBLE change ---AVR990:Disable The PARAMETER of Z3 EVENT : Uses two ASCII characters. (see page4 J) section) Z3ON<CR> Z3OFF<CR> Z3MUON<CR> Z3MUOFF<CR> Z3CSST<CR> Z3CSMONO<CR> Z3CVFL 50<CR> Z3CVFR 50<CR> Z3HPFON<CR> Z3HPFOFF<CR> Z3PSBAS 50<CR> Z3PSTRE 50<CR> -39- ANALOG TUNER Control (AVR model only. except North America model) EVENT TF PARAMETER AN****** (6 digits) function TUNER Frequency change --- ****. ** kHz at AM band ****. ** MHz at FM band TUNER PRESET change to No. ** TUNER BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode example TFAN105000<CR> (1050. 00kHz at AM) TPANA1<CR> (PRESET No. "A1") TMANAM<CR> TMANFM<CR> TMANAUTO<CR> TMANMANUAL<CR> TP TM AN**(PRESET No. ) ANAM ANFM ANAUTO ANMANUAL -40- SIRIUS Control North America Model Only EVENT TF PARAMETER ST*** (3 digits) STPL STPL STUL STUL STCH STCH STMP STMP ST** ON OFF OK NG SUB UNS VAL INV (PRESET No. ) function --- ***:ST CH No. Parental Lock Status "ON" Parental Lock Status "OFF" Unlocking is successful Unlocking is failed Subscribed channel Unsubscribed channel Valid Channel Invalid Channel SIRIUS PRESET change to No. ** SIRIUS CH NAME change example TFST001<CR> (ST001 CH at SIRIUS TUNER) TFSTPL ON<CR> TFSTPL OFF<CR> TFSTUL OK<CR> TFSTUL NG<CR> TFSTCH SUB<CR> TFSTCH UNS<CR> TFSTMP VAL<CR> TFSTMP INV<CR> TPSTA1<CR> (PRESET No. "A1") STCH NAME LONG CHANNEL NAM<CR> TP ST CH NAME ******************** (20 digits) ARTIST ***************** (36 digits) TITLE ***************** (36 digits) COMPOSER ***************** (36 digits) ID ************ (12 digits) SIGNAL EXCELLENT SIGNAL GOOD SIGNAL WEAK SIGNAL NOSIGNAL SIRIUS ARTIST NAME change STARTIST High and mighty color <CR> STTITLE Memory Crysis <CR> STCOMPOSER High and mighty color <CR> STID 123456789012<CR> STSIGNAL STSIGNAL STSIGNAL STSIGNAL EXCELLENT<CR> GOOD<CR> WEAK<CR> NOSIGNAL<CR> SIRIUS TITLE NAME change SIRIUS COMPOSER NAME change SIRIUS ID(SR000 Selected) SIRIUS ANTENNA SIGNAL STATUS change -41- HD RADIO Control(North America model only) EVENT TF PARAMETER HD****** (6 digits) HDMC*(1 digit) HD**(PRESET No. ) function --- ****. ** kHz at AM band (>050000 is AM. ) ****. ** MHz at FM band (<050000 is FM. ) ---HD Multi Cast CH change(*:0 8, A:Analog) HD PRESET change to No. ** HD RADIO BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO-HD mode ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode HD STATION NAME change HD STATION LONG NAME change HD ANTENNA SIGNAL STATUS change example TPHD105000<CR> (1050. 00kHz at AM) TFHDMC2<CR> TPHDA1<CR> (PRESET No. "A1") TMHDAM<CR> TMHDFM<CR> TMHDAUTOHD<CR> TMHDAUTO<CR> TMHDMANUAL<CR> HDST NAME ********<CR> HDSTL NAME (56 digits)<CR> HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDMLT LEV 0<CR> LEV 1<CR> LEV 2<CR> LEV 3<CR> LEV 4<CR> LEV 5<CR> LEV 6<CR> CURRENT *<CD> TP TM HD HDAM HDFM HDAUTOHD HDAUTO HDMANUAL ST NAME (8 digits) STL NAME (56 digits) SIG LEV * (1 digit) MLT CURRENT * (1 digit) MLT CAST CH (8 digits) PTY(18 digits) ARTIST(40 digits) TITLE(40 digits) ALBUM(40 digits) GENRE(23 digits) MODE HD MULTI CAST CURRENT CH change HD MULTI CAST CH change HD HD HD HD HD HD PROGRAM TYPE change ARTIST NAME change TITLE NAME change ALBUM NAME change GANRE change MODE(ANALOG/DIGITAL) HDMLT CAST CH ********<CR> HDPTY (18 digits)<CR> HDARTIST (40 digits)<CR> HDTITLE (40 digits)<CR> HDALBUM (40 digits)<CR> HDGENRE (23 digits)<CR> HDMODE ANALOG<CR> HDMODE DIGITAL<CR> -42- Network/iRadio/mServer/USB/Rhapsody/Napster Extended Control EVENT NSA 0 1 2 3 4 5 6 7 8 PARAMETER function Onscreen Display Information is Answered By the NSA Command. [. . . ]