User manual DENON ADV-1000

[. . . ] DVD SURROUND RECEIVER ADV-1000 OPERATING INSTRUCTIONS MODE D'EMPLOI CH ON POWER 1 CH 2 5 VOL 3 VCR OFF VCR POWER 4 CH 6 9 SLEEP CLEAR TV POWER 7 CH 8 TV/VCR TV CALL DISPLAY +10 0 RETURN INPUT MODE SURROUND MENU FUNCTION ENTER MODE VOLUME BAND MUTE CH SHIFT NTSC/PAL STATUS MEMO AUDIO ANGLE TOP MENU TU SUB TITLE PROG/DIRECT REPEAT A-B DVD SURROUND RECEIVER ADV-1000 REPEAT RANDOM FUNCTION / SELECT MASTER VOLUME CH. SELECT T. TONE SDB/TONE SURR. PARA PROGRESSIVE SCAN C 8 1:02:46 DIG AUTO SETUP CDR/MD/TAPE TUNER/TV/VCR DVD DVD ON / STANDBY DIGITAL REMOCON MODE PHONES AUTO DECODE 5CH STEREO SURROUND MODE STATUS TIMER/SET SDB/TONE OPEN / CLOSE BAND - TUNING + 2CH MODE FOR ENGLISH READERS PAGE 4 ~ PAGE 87 POUR LES LECTEURS FRANCAIS PAGE 88 ~ PAGE 171 2 We greatly appreciate your purchase of this unit. 2 To be sure you take maximum advantage of all the 2 Nous vous remercions pour l'achat de cet appareil. 2 Pour être sûr de profiter au maximum de toutes les features this unit has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise. [. . . ] With LDs and DVDs, there is of course no need for an extra disc; the pictures and sound can be recorded simultaneously on the same disc, so the discs can be handled in the same way as discs with other formats. These are the same discs as conventional CDs (recorded in 2 channels) but include 5. 1 channel surround signals. They do not include images, but they do permit surround playback on the ADV-1000 and on CD players. DTS surround track playback offers the same intricate, grand sound as in a movie theater, right in your own listening room. 2 DTS compatible media and playback methods Marks indicating DTS compatibility: and . The following are general examples. Also refer to the player's operating instructions. Media CD LD (VDP) DVD DTS Digital output jacks Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 2 Optical or coaxial digital output (same as for PCM) 3 Playback method (reference page) Set the input mode to "AUTO" or "DTS" (page 35, 36). 1 Set the input mode to "AUTO" or "DTS" (page 35, 36). 1 Set the input mode to "AUTO" or "DTS" (page 35, 36). 1 DTS signals are recorded in the same way on CDs and LDs as PCM signals. Because of this, the un-decoded DTS signals are output as random "hissy" noise from the CD or LD player's analog outputs. If this noise is played with the amplifier set at a very high volume, it may possibly cause damage to the speakers. To avoid this, be sure to switch the input mode to "AUTO" or "DTS" before playing CDs or LDs recorded in DTS. Also, never switch the input mode to "ANALOG" or "PCM" during playback. The same is true when playing CDs and LDs recorded in DTS on the ADV-1000 or on LD/DVD compatible players. With DVDs, the DTS signals are recorded with a special recording method so there is no problem. For DVDs, the DTS signals are recorded in a special way so this problem does not occur. 2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing (output level adjustment, sampling frequency conversion, etc. ). In this case the DTS-encoded signals may be processed erroneously, in which case they cannot be decoded by this unit, or may only produce noise. Before playing DTS signals for the first time, turn down the master volume to a low level, start playing the DTS disc, then check whether the DTS indicator on this unit (see page 36) lights before turning up the master volume. 3 To play in DTS Digital Surround on the ADV-1000, set "DVD setting change" -- "Audio setting" -- "Digital output" to "Normal" in the setup. (The factory default is "Normal". ) "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. 39 ENGLISH 14 SURROUND PLAYBACK (1) Before playing with the surround function · Adjustments using the test tones can only be performed in the "Auto" mode and are only valid for the Auto decode Surround modes. The adjusted levels are automatically stored in the memory. POWER VCR POWER · Even after adjusting using the test tones, the various channels can be adjusted using the procedure described below to suit the program source and your preferences. POWER VCR POWER CLEAR TV POWER 7 CH 8 TV/VCR 9 SLEEP TV CLEAR TV POWER 7 CH 8 TV/VCR 9 SLEEP TV CALL DISPLAY +10 0 CALL DISPLAY +10 0 RETURN INPUT MODE SURROUND RETURN INPUT MODE SURROUND MENU FUNCTION MENU FUNCTION 2 MODE ENTER 2 VOLUME 2 MODE ENTER 2 VOLUME BAND BAND MUTE CH SHIFT NTSC/PAL STATUS MEMO AUDIO ANGLE TOP MENU SUB TITLE CH MUTE SHIFT NTSC/PAL STATUS MEMO AUDIO ANGLE TOP MENU TU SUB TITLE TU PROG/DIRECT REPEAT A-B REPEAT RANDOM PROG/DIRECT REPEAT A-B REPEAT RANDOM CH. SELECT T. TONE SDB/TONE SURR. PARA CH. SELECT T. TONE SDB/TONE SURR. PARA 1, 3 SETUP CDR/MD/TAPE TUNER/TV/VCR DVD 1 SETUP CDR/MD/TAPE TUNER/TV/VCR DVD REMOCON MODE REMOCON MODE 1 Press the TEST TONE button. T. TONE 1 Select the speaker whose level you want to adjust. · The channel switches as shown below each time the button is pressed. CH. SELECT Remote control unit 2 Test tones are output from the different speakers. Use the channel volume adjust buttons to adjust so that the volume of the test tones is the same for all the speakers. · The channel to be adjusted can be changed using the CH. SELECT button and the ( and ) cursor buttons on the remote control unit during the adjustments using the test tones. Remote control unit FRONT L SUBWOOFER CENTER SURROUND L FRONT R SURROUND R 2 Adjust the volume level of the selected speaker while the channel level is displayed. Remote control unit Remote control unit 3 After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below. T. TONE Remote control unit 40 ENGLISH [1] 2-channel mode settings In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). [. . . ] · Check whether the connections are correct. 14 35 36 37 36 9, 10, 12 Monitor doesn't display an image. · Set the input switching of the TV to the jack to which the video input is connected. · Make settings uniform for either composite video or S-video connectors. · A copy cannot be made. -- 10, 12 The program cannot be copied from DVD to the VCR. -- · Switch on the power of the subwoofer. · Make the proper connections. -- 26 14 The subwoofer does not produce sound. The test tone is not output. · Set to auto decode. 40 Remote control unit · Replace with new batteries. [. . . ]