User manual DELONGHI X TD 3095E T

[. . . ] If you follow our tips, we are sure the appliance will give you complete satisfaction and long and faithful service. This appliance will make your everyday household cleaning easier. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. [. . . ] 1) Attach the connector to the coupling and insert until it locks into place (fig. 2) The telescopic tube enables the hose to be extended to the required length (fig. 3) The crevice tool and multipurpose nozzle are housed in the tool compartment. USING THE CLEANING TOOLS · Carpet/floor brush Efficiently removes dust from floors (marble or tiled), rugs or carpets. When the pedal is pushed towards the "hard floors" symbol ( ), the bristles protrude to clean hard floors more efficiently. This position is recommended for in-depth cleaning of floors and for floors with pronounced joints. When the pedal is pushed towards the "carpets" symbol ( ), the bristles retract and the brush is ready to clean fabric surfaces and delicate floors such as parquet, marble, etc. 7) The brush tool is ideal for removing dust from fabric, furniture books, curtains, frames and clothing. INSTRUCTIONS Before using the appliance, extract the power cable completely and plug into the mains. To rewind the cable, unplug and press the cable winder pedal (R) (fig. Operation To turn the vacuum cleaner on, press the pedal switch (Q) lightly (fig. While cleaning, you can turn vacuuming off by pressing the "StopVac" button (H) on the remote control. NB: the "StopVac" button (H) turns vacuuming off but not the appliance. 10) The electronic regulator enables suction power to be varied according to the type of surface to be cleaned. The maximum power of the appliance can therefore be exploited to vacuum dust from carpets or hard floors (marble, ceramics, cotto, etc) and a lower suction power to clean curtains or other light fabrics. To select one of the three power levels available, press the "Power Control" switch on either the appliance (N) or the remote control (F) (fig. The LED on the appliance corresponding to the selection lights up (fig. NB: if the batteries are flat, you can still adjust power using the "Power Control" button (N) on the appliance. 12 CLEANING Replacing the remote control batteries If the remote control commands do not work, you must replace the batteries. 12) The dust bag full indicator (P) indicates when the dust bag needs changing or the vacuum hose is blocked. You should change the bag before the full length of the indicator turns red to guarantee optimum hygiene and the quality of the air emitted into the environment. Replacing the dust bag To change the paper dust bag, pull the bag compartment opening lever (T) (fig. [. . . ] If you have to interrupt cleaning for a brief period, the appliance has a convenient hose "parking" system. Insert the bracket on the brush joint into the housing on the bottom of the appliance (Fig. 21). IMPORTANT WARNING Malfunction of the appliance (low power, unusual noise or complete breakdown) could be caused by obstructed nozzles or hoses or faulty electrical components. To remove obstructions from the hose, detach the hose from the handle and connector by pressing the tabs (L) (fig. [. . . ]