User manual DELONGHI XM 48D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DELONGHI XM 48D. We hope that this DELONGHI XM 48D user guide will be useful to you.


DELONGHI XM 48D : Download the complete user guide (181 Ko)

Manual abstract: user guide DELONGHI XM 48D

Detailed instructions for use are in the User's Guide.

[. . . ] With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. [. . . ] Before using the vacuum cleaner for the first time, check that the filter is positioned correctly. INSTALLING THE WALL SUPPORT /TRANSFORMER Position the wall support near a power socket Fasten the wall support/transformer, using the two screws supplied (Fig. Make sure that the cord is positioned so that the two screws secure it in the desired direction (Fig. After use, the appliance must always be attached to the wall support, in order to recharge it and ensure maximum operating efficiency. Motor body Transformer Motor protection filter support Motor protection filter Anello blocca-filtro Short crevice tool Crevice tool Never operate the appliance without the filter!If you should decide not to use the vacuum cleaner any longer, it is advisable to cut the power cord (after having unplugged it from the socket) so as to make the appliance unusable. The manufacturer declines all liability for any damage caused by the incorrect use of the appliance. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. STARTING THE APPLIANCE FOR THE FIRST TIME Connect the transformer to a power socket Attach the vacuum cleaner to the support, as shown in Fig. The light will switch on to indicate that the appliance is correctly fitted in the support and is being recharged. : Before being used for the first time, or when the batteries are discharged, the vacuum cleaner must be left to charge for around 16 hours. USING THE VACUUM CLEANER Remove the vacuum cleaner from the recharging support and press the ON/OFF switch (Fig. 5) These tools are useful for vacuuming dust and dirt in hard-to-get-to places, such as corners, edges, drawers, etc. CHARGE/OPERATING INDICATOR The light switches on when the appliance is in the support and when it is on. A reduction in vacuuming power together with the switching off of the light indicate that the appliance must be recharged. [. . . ] Before putting the filter back in place, check that it is completely dry and that it is not damaged, so as not to compromise the performance of the appliance. CLEANING AND MAINTENANCE To clean the outside of the appliance and the accessories, use a damp cloth and soapy water. uSEFUL TIPS The battery and the transformer last longer if treated correctly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DELONGHI XM 48D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DELONGHI XM 48D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.