User manual DELONGHI VVX 7420C

[. . . ] If their use is necessary, only adapters, multiple sockets and extensions complying with current safety standards and regulations should be used, taking care not to exceed the power limit indicated on the adapter. · Noises could occur when the steam generator is heating up or cooling down. · The manufacturer is not liable for damage caused by inappropriate, incorrect or irresponsible use or for damage resulting from repairs carried out by unqualified personnel. · If the tank door is damaged, replace it with an original spare part. [. . . ] This reduces the safety of the appliance and irreparably damages the steam generator which would have to be replaced. · If the ironing system is dropped causing visible damage to the appliance (steam generator or iron), do not use. · The steam generator should be placed on a flat surface extremely resistant to high temperatures. · The ironing system must be used and rested on a stable surface. · When placing the iron on the iron rest, make sure the iron rest is located on a stable surface. This appliance complies with directive 89/336/EEC on radio interference suppression. DESCRIPTION 1) Steam discharge wheel with top and bottom activation and end lock for continuous delivery (certain models only). 2) Iron thermostat knob 3) "Iron at temperature" indicator light 4) Iron rest 5) "ON" button 6) Steam regulation 7) "No water" indicator 8) "Steam ready" indicator 9) Cable tidy 10) Water fill door 11) Double cable tidy 12) Antical System time) or if you have not used the steam for several minutes, press the steam button several times away from the ironing board. · During use, the iron can be rested in a "vertical" position (fig. However, make sure the surface is even to avoid the iron falling over. · The double cable connecting the iron to the steam generator is positioned centrally to enable both right handed and left handed users to iron comfortably. INSTRUCTIONS STEAM IRONING Before steam ironing, make sure the fabric is suitable for this kind of ironing. In case of very hard water (hardness above 27°F) we suggest using 50% distilled water diluted with tap water. Never use chemical substances or detergents (eg perfumed water, essences, descaling solutions, etc). Filling the tank and connecting to the mains Make sure the power cable is unplugged from the mains socket. Always top up with water each time you turn your ironing system on, even if you want to dry iron. The "steam ready" light (8) and "iron at temperature" light (3) come on. NB: When used for the first time, the appliance may give off smoke and an odour for several minutes. This is caused by heating and subsequent drying of the sealers used in assembling the steam generator and iron. It is also normal to hear the noise of the pump conveying water to the steam generator. 9 USEFUL TIPS · The original appearance and softness of fabrics such as velvet or wool, or gloves, bags etc. can be restored by passing the iron a short distance away with the steam jet in operation. · Do not rest or use the iron on zips, hooks, rings etc to avoid scratching the plate. · After use, always wait for the iron to cool down before putting away. · Separate clothes according to the recommended ironing temperature and begin ironing with items requiring the lowest temperatures. [. . . ] · When the water in the tank has run out, the pump becomes noisier. However, as described above, you should immediately top up the water in the tank. After topping up the level of water in the steam generator, you should close it to avoid ruining the iron plate. DRY IRONING Plug the appliance into the mains. Position the thermostat regulation knob (2) according to the type of fabric to be ironed (fig. [. . . ]