User manual DELONGHI TRD 0615

[. . . ] GENERAL INSTRUCTIONS Take the radiator out of its packing box and remove any polystyrene pieces or any other packaging material that might be lodged inside it. Make sure that the radiator has not been damaged during transit and that the mains cable is in working order. [. . . ] turn the numbered dial of the time-clock in a clockwise direction until the number 10 coincides with the reference mark s on the time-clock. Set the time period during which you wish the appliance to work by pushing the notches towards the centre. At this point sections will be visible corresponding to the working periods. 4 - Set in this way the radiator will function automatically every day during the set period. To change the programmed time period, just bring back the black notches to their original position and set the new working periods required. If you wish the appliance to function without programmed working periods push all the notches towards the centre. In this case, to turn the appliance off totally the plug must be pulled out apart from switching off, so as to avoid unnecessary working of the timer. d) Models with 12-hour mechanical timer (delay-start setting) Switch on the appliance and select the desired power and temperature settings as described above. The appliance will then automatically switch on when this time has elapsed. MAINTENANCE Your oil filled raditor is absolutely free from maintenance, fully reliable and will give many years of trouble free service. Wipe radiator with soft damp cloth; do not use detergents or abrasives. IMPORTANT NOTES - Do not use your heater close to bath, wash-basin, shower and swimming pool. [. . . ] ATTENTION: in order to avoid any danger caused by an accidental resetting of the safety system, this appliance must not be powered through an external timer. IMPORTANT: Do not cover the appliance during functioning, this could cause a dangerous temperature increase of the radiator. 5 [. . . ]