User manual DELONGHI PINGUINO PAC 10

[. . . ] Ensure that the outlet of the discharge hose is kept free from debris and blockages. Do not obstruct the ventilation holes at the rear of the unit or the front grilles. The Pinguino should not be installed where there may be combustible gases in the atmosphere. [. . . ] If you want to use the timer, turn the switch to the intermediate position . As with all clocks, the programmer/timer must be set to the right time. The timer is an electric clock and only works while the unit is connected to the outlet. When it is unplugged or there is no electricity, the timer stops (the clock is "slow") and must be re-set. 1) Set the times when the unit will function by pushing the notches in the required interval towards the outside (each notch represents 15 minutes). 2) Check that the timer indicates the exact time (see setting the time). 3) Choose the required function according to the instructions on the following page. When the timer's on the "0" (POWER OFF) position, the appliance doesn't work. Turning on and programming the unit With the unit turned off, the function selector 11 is in the "O" position. rotate the function selector knob clockwise: · Place the large crystal symbol in line with the reference mark to operate the unit in air conditioning mode at maximum fan speed. ⷠPlace the small crystal symbol in line with the reference mark to operate the unit in air conditioning mode at minimum fan speed. Now set the required temperature by rotating the room thermostat knob. Position the appliance in the room without inserting the tube; in this way the dehumidified air will exhaust directly into the room. In the dehumidifying mode, air colder than the room temperature will exhaust from the air exhaust grill. Conversely, air warmer than room temperature will be exhausted from the coupling 4 on the back side of the appliance. We therefore recommend rotating the room thermostat knob 15 to the maximum cool position. When room temperature has reached the required level, rotate the thermostat knob slowly clockwise until the thermostat is activated, turning the unit off. This programs the unit to the precise level of comfort required which will then be automatically maintained by the thermostat with considerable energy savings. [. . . ] This warranty shall apply only if the AIR-CONDITIONER is used in accordance with the factory directions which accompany it, and on Alternatign Current (AC) circuit. This warranty is in lieu of all other warranties and representations, expressed or implied, and all other obligations or liabilities on our part. We do not authorize any other person or company to assume for us any liability in connection with the sale or use of our AIR-CONDITIONER. [. . . ]