User manual DELONGHI PACT 90

[. . . ] At the end of its working life, take the appliance to a special collection centre. You are therefore recommended to dispose of them in special differentiated waste collection containers. The refrigerant gases R290 and R407c conform to EC regulations on the environment. Keep the appliance at least 50 cm away from flammable substances (alcohol etc) or pressurised containers (eg aerosol cans). · · · · · · For environmentally-friendly models only (T90ECO, T100ECO) · · · If the appliance is used in rooms without adequate ventilation, take the necessary precautions to avoid possible leaks of refrigerant gas stagnating in the atmosphere, creating a fire risk. [. . . ] G), thus guaranteeing efficient dehumidifying. in the wooden socle of a French window in the wall: you are recommended to insulate the section of wall using suitable insulation. in the window pane 106 hot air E Keep the air hoses as short and free of curves as possible to avoid constrictions. cold air G 20 GB-5751012500 14-04-2004 15:59 Pagina 21 Description of the control panel THE CONTROL PANEL A ON/OFF button B Mode selection button Conditioning, BOOST (superconditioning), dehumidifying, fan. C Air conditioning mode indicator light D BOOST (superconditioning) mode indicator light E Dehumidifying mode indicator light F Fan mode indicator light (air purifying in model T100ECO) G Increase temperature/humidity/ programmed operating time button H Timer in operation indicator light I Display displays the temperature/humidity values set and the programmed operating time L Timer button M Temperature display N Humidity display O Reduce temperature/humidity/programmed operating time button P/Q/R/S Fan speed and AUTO mode indicator lights T Fan speed selection button U "SWING" button to move grille flaps (model T100ECO only) NB: The "SWING" button (U) moves the grille flaps to distribute the cool air uniformly in the room. When the button (U) is pressed and the flaps have begun moving alternately forwards and backwards, pressing the button again will lock the flaps in their current position. Pressing the button again will restart the flaps moving forwards and backwards. When the appliance is turned off, they will close irrespective of their position. MODELS WITH REMOTE CONTROL UNIT (model T100ECO only) Operation - Pressing the ON/OFF button ( ) turns the appliance on or off. Each time the FAN button is pressed, the speed of the fan rotates through the available options (Max, Min, Silent, Auto). On the control panel, the LED corresponding to the selected speed lights up. - The SET buttons (+) and (-) increase or reduce temperature or humidity. Each time the button is pressed, the appliance confirms the selection with a beep and the light on the remote control unit comes on. NB: The remote control unit can be used for the following functions only: to turn the appliance on or off, vary fan speed and set temperature or humidity depending on the operating mode selected on the control panel. (see pages 22-23) Indicator light Replacing the batteries · Remove the cover on the back of the remote control unit; · replace the flat batteries with two AAA 1. 5 V batteries, making sure they are in the correct position (see instructions inside the battery compartment); · Replace the cover. ON/OFF button FAN button FAN + SET + button SET - button SET - 21 ENGLISH GB-5751012500 14-04-2004 15:59 Pagina 22 Operation TURNING THE APPLIANCE ON Plug into the mains. Two lines appear on the display indicating that the appliance is in standby. Press the ON/OFF button (A) (when turned on, the air conditioning unit starts operating in the same mode as when it was turned off). Press the MODE (B) button until the indicator light corresponding to the required mode lights up: Indicator light C Indicator light D Indicator light E Indicator light F : Air-conditioning mode : BOOST mode (superconditioning) : Dehumidifying mode :FAN MODE (air purifying in model T100 eco only) (in model T100eco, when the selection has been made, the flaps will open at a preset angle. When the air conditioning unit is turned off, the flaps will reclose). AIR-CONDITIONING MODE Ideal for hot humid weather when you need to cool and dehumidify the room. After selecting the air-conditioning mode, the indicator light (M) comes on. To set operation of the appliance correctly, press the "+" (G) or"-" (O) buttons until the required temperature is displayed. The most suitable temperature for the room during the summer varies from 24 to 27°C. You are recommended, however, not to set a temperature much below the external temperature. Then select the fan speed by pressing the "FAN" button (T) until the indicator light corresponding to the required fan speed lights up: MAX (S): the air conditioning unit operates at maximum to reach the required temperature as rapidly as possible. MIN (R): reduces noise levels but still maintains a good level of comfort SILENT (Q):for silent operation AUTO (P): the appliance automatically selects the most suitable fan speed in relation to the temperature set on the digital display. 25 BOOST MODE (superconditioning) This is set in the same way as the "AIR-CONDITIONING" mode, but with a boost, useful when you want to make a very hot room comfortable as rapidly as possible. 22 GB-5751012500 14-04-2004 15:59 Pagina 23 Operation DEHUMIDIFYING MODE Ideal for reducing the humidity in a room without lowering or raising the temperature (spring or autumn, damp rooms, rainy spells, etc). [. . . ] To empty the internal circuit completely of water, press the MODE (B) and FAN (T) buttons simultaneously for a number of seconds without removing the tank 8 . The water in the internal circuit will drain into the tank 8 or through the continuous drain hose 9 if connected. Remove the first 3M air purifying filter (white) (model T100ECO only). Remove the dust filter by detaching it from the grille. 3M air purifying filter dust filter intake grille M 27 ENGLISH Use a vacuum cleaner to remove the dust collected on the anti-microbial filter. [. . . ]