User manual DELONGHI MW 25

[. . . ] SAFETY WARNINGS • • Read this entire Instruction for Use carefully before using the appliance. Keep the Instruction for Use. Please note: This symbol identifies important advice or information for the user. • This microwave oven is intended for heating food and beverages only. Drying of food or clothing and heating of warming pads, slippers, sponges, damp cloth and similar may lead to risk of injury, ignition or fire. [. . . ] Please note: you do not need to select the power level in the automatic defrost function. Please note: you can also change the microwave power level during cooking by just pressing the POWER LEVEL button (6) (fig. Pressing the button once displays the current power level, pressing it again changes the power. Please note: if for any reason cooking is not started within 2 minutes, the settings are automatically cancelled. The end of cooking is indicated by 3 beeps and “End” (fig. Please note: Please note: you can open the door to check on cooking at any time. Microwave emission and operation of the oven cease and will start again when the door is closed and the START button is pressed (5) (fig. Please note: If you need to stop cooking for any reason without opening the door, just press the STOP button (7) (fig. Please note: to finish cooking, proceed as follows: If the oven door is open, press the STOP button once (7) (fig. If the oven door is closed and cooking is in progress, press the STOP button (7) twice. 9). This function is also useful to complete unfinished cooking. • The oven is fitted with a safety device to prevent children from turning it on unintentionally. To enable the safety device: • Press and hold the STOP button (7) (fig. • The appliance emits a short beep and the icon lights up on the display. • To disable the safety device, press and hold the STOP button (7) (fig. 9 ) for 3 seconds. CHILD SAFETY • • Each year, technological progress requires the production of ever more electricity. The result is ever greater environmental impact due to the increase in pollutants (CO2, sulphur, etc. ) and exploitation of non-renewable natural resources (carbon, gas, oil). by reducing the consumption of the appliance in standby), energy saving is a considerable source of “virtual” renewable energy, immediate and accessible to all. To reduce the energy consumption of the oven when not in operation: • Press and hold the POWER LEVEL button (6) (fig. • If no button is pressed, the display will go off automatically after 10 minutes (the clock settings will be maintained). • If the door is left open for more than 10 minutes, the oven light (B) goes off automatically. • To disable energy saving and to display the time again, press and hold the POWER LEVEL button (6) (fig. 10) for 2-3 seconds; the appliance emits a beep. ENERGY SAVING FUNCTION • This function is perfect for heating small quantities of food and drink. [. . . ] Please note: if you do not wish to programme a second phase, press the START button directly (5) (fig. The “Breakfast” button is now associated with your new cooking process and you can run it quickly by pressing the button (4) (fig. Please note: in the event of power failure, or if the oven is unplugged from the mains, when the electricity comes back on, the oven will automatically reset the original default “Breakfast” function. CLEANING AND MAINTENANCE Danger!before cleaning or maintenance, always unplug the appliance from the mains and wait until cold. [. . . ]