User manual DELONGHI HWB5050T

[. . . ] To install, proceed as follows: If the appliance is used in a bathroom, to avoid all risk, it must be installed as shown in fig. If installed in another room, respect the minimum distances shown in fig. [. . . ] At the end of this procedure, red sectors corresponding to the operating periods can be seen. - In this way, the appliance will function automatically each day at the times set. (Important: the plug must always be inserted in the socket) - To modify programming, return the red teeth to the initial position and set the new operating periods. - To use the appliance without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning off the switches, also unplug from the mains to avoid the programmer operating uselessly. MODELS WITH TOWEL DRYER RAIL (Model A) Certain models have a towel dryer rail (F) to dry towels. To avoid overheating in this mode, the heat output must not go above 1000 W. When the appliance is not used for drying, lift the rail upwards as far as it will go to release it, then move it downwards (fig. Important: Never overload the towel dryer rail (F) and take particular care when drying delicate fabrics. - Do not use the appliance near showers, bathtubs or swimming pools, etc. - Do not cover the appliance when in operation as this could cause a fire risk. - The heater must be positioned at least 50 cm from furniture, walls, curtains, or other objects. [. . . ] For at sætte apparatet i drift igen, skal du tage stikket ud af stikkontakten, og lad apparatet køle af i et par minutter for på denne måde at fjerne årsagen til overophedningen. At bortskaffe et elektrisk husholdningsapparat separat gør det muligt at undgå eventuelle negative konsekvenser for miljø og helbred på grund af upassende bortskaffelse og det giver mulighed for at genbruge de materialer det består af og dermed opnå en betydelig energi- og ressourcebesparelse. [. . . ]