User manual DELONGHI ECC 2400T

[. . . ] Use the 4 eye bolts supplied with the appliance to fasten the brackets in position (fig. Fit the castors to the pins on the feet and push firmly until they click into position. Check that no pieces of polystyrene or other packaging material have been left between the elements of the heater. ELECTRICAL CONNECTION - Before plugging the radiator into the mains, check that your supply voltage is the same as that shown on the rating plate of the appliance. [. . . ] If the selected temperature is higher than the actual room temperature, the appliance will start automatically and rapidly heat the room until it reaches the selected temperature. The unit will automatically maintain the temperature at a constant level, by switching between maximum, medium, minimum power and OFF (If the room temperature exceeds the selected temperature level the appliance will switch off). If medium power level has been selected using the "ON MODE" button, the appliance will 4 5710004200 hm uk 31-01-2002 14:43 Pagina 5 modulate between medium, minimum power and OFF to maintain a selected temperature. Note: the display will always show the power setting you have chosen, not the one it is currently working at. FROST STAT FUNCTION Press the "ON MODE" button (it is recommended to select the maximum power level). When set in this way, the appliance will switch on automatically only if the room temperature falls below 5°C, thereby preventing freezing, at minimum energy consumption. N. B. This function is not guaranteed in the event of power failures, lasting more than 2 minutes. MAN : °C 3) PROGRAMMING THE ELECTRONIC TIMER The timer allows you to set 2 programmes in a 24 hour period. To programme the timer: 1-Press the " AUTO" button, this accesses the 1st programme (programme A). The yellow timer ON lamp will light up. AUTO : °C Timer lamp on 2-Set the start time for your programme by pressing the "HOUR" button to set the hour and the "MIN" button to set the minutes. 3-To select how long you require the heater to be on, push the "+min" button repeatedly until your chosen operating timespan appears. The time periods you are able to choose from are (30', 45', 1hr, 2hr, 4hr, 8hr (max). AUTO AUTO AUTO °C : O O : 0 Display when setting programme A Display when setting programme B Display when setting for 45 mins operating time 4- To program a second time period (programme B), press the " AUTO" button twice and then proceed as above to select the start hours and minutes. When the operating time is changed, the time of both programmes is updated. Important: the operating time period must be the same as in Programme A. to 1hour, both programmes will operate for 1 hour. 5 5710004200 hm uk 31-01-2002 14:43 Pagina 6 5- Use the " +" or " -" buttons to set the desired comfort temperature, as described above. 6-When set in this way the heater will automatically switch on at the set time for the designated time period and automatically maintain the preset comfort temperature. To cancel a programme, press the " AUTO" button and then the "hour" buttons until the display shows as below. : AUTO TIMER OVERRIDE To operate the appliance without using the timer, press the "ON MODE" button (Fig. 3). IMPORTANT You must leave the heater plugged in at the mains socket to keep the heater's memory programmed. If the heater loses its electricity supply for more than 2 minutes, e. g. [. . . ] - Young children should be supervised to ensure that they do not play with the appliance. - This radiator is filled with a precise quantity of oil and repairs which require it to be opened must be carried out exclusively by the manufacturer or an authorised service centre. In the case of oil leaks, contact the manufacturer or the authorised service centre. - When scrapping the appliance, respect legislation on the disposal of oil. [. . . ]