User manual DELONGHI DLM 9 XLN

[. . . ] This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference. Meaning Serious injury or death risk Dangerous voltage risk Warning; Risk of fire / flammable materials Injury or property damage risk Operating the system correctly Carefully read all instructions before using your Appliance and keep them in a convenient place for reference when necessary. This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. [. . . ] If you suspect any damage, Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth etc. The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C. The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer. 2 Installation of the Oven The appliances are supplied with installation kits and can be installed in a worktop with the appropriate dimensions. After making the electrical connections, insert the oven into the cabinet by pushing it forward. Open the oven door and insert 2 screws in the holes located on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws. Appliance's power rating (also indicated on the identification plate). If the mains cable is damaged and needs to be replaced this should be done by a qualified personnel. The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. 3 Electrical Connection and Safety WARNING: The electrical connection of this appliance should be carried out by an authorised service person or Qualified electrician, according to the instructions in this guide and in compliance with the current local regulations. Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the If the appliance is not connected to the mains with a plug, a all-pole disconnector (with at least 3 mm contact spacing) must be used in order to meet the safety regulations. The appliance is designed for a power supply of 220-240V ~ and 380-415V 3N~. If your supply is different, contact the authorised service person or a qualified electrician. The power cable (H05VV-F) must be long enough to be connected to the appliance, even if the appliance stands on the front of its cabinet. Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below. 1 Oven Controls Oven function control knob Turn the knob to the corresponding symbol of the desired cooking function. Oven thermostat knob After selecting a cooking function, turn this knob to set the desired temperature. The oven thermostat light will illuminate whenever the thermostat is in operation to heat up the oven or maintain the temperature. Oven Functions * The functions of your oven may be different due to the model of your product. Defrost Function: The oven's warning lights will switch on and the fan will start to operate. To use the defrost function, place your frozen food in the oven on a shelf in the third slot from the bottom. [. . . ] Do not clean the stainless steel parts while they are still hot from cooking. Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a long time. Removal of the Inner Glass You must remove the oven door glass before cleaning, as shown below. Push the glass in the direction of B and release from the location bracket (x). [. . . ]