User manual DELONGHI CTM4023 TOASTER

[. . . ] · Before using for the first time, to eliminate the new smell, operate the toaster without bread inside for at least 5 minutes. · Check that the mains supply corresponds to the voltage on the the appliance rating plate. Connect the appliance to a correctly earthed power socket (minimum rating 10A) only. The manufacturer declines all liability for any accidents due to the incorrect earthing of the appliance. [. . . ] · Do not insert (by force) foods that are too by for the slots. · Do not insert forks ar other utensils into the toaster in order to remove bread, as it may damage the resistence coils of the appliance. Remove the plug from the socket and turn the appliance over, gently shaking it to remove the lodged items. Toster CTM 2023/4023 4 Cleaning and Maintenance · Before cleaning, switch off at the mains remove plug and allow to cool · To clean the inside, turn toaster upside down over the sink and gently shake · Empty the crumb tray regularly - see "Crumb tray" section · Use a soft dampened cloth to wipe the outside of the toaster and dry with a soft, dry cloth · DO NOT use metal polish or harsh scouring agents · DO NOT immerse your toaster in water · DO NOT use any sharp or pointed articles for cleaning the inside as this will damage the heating element · NEVER put metal objects or your fingers into the toasting slots. Safety Warnings · The appliance is exclusively for the use for which it has been manufactured. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorised personnel. · After removing the appliance from the packaging, make sure that the product is complete and in perfect condition. · The plastic bag in which the appliance was packaged should be kept out of reach of children as it poses a suffocation hazard. · In order to remove the dust that may have accumulated on the appliance, simply dust it off with a soft cloth. · Before inserting the plug into the electrical socket, make certain: · The voltage of the socket corresponds to the value indicated on the information label, attached to the appliance. · The electrical socket is adequately earthed, the manufacturer declines any responsibility for the lack of observation of this norm. · In the case of incompatibility between the socket and the plug of the appliance, have it replaced by a qualified technician. The use of adapters, multiple socket units and/or extension cables is not recommended. Whenever it may be necessary to use such equipment, it is advisable to use only simple or multiple adapters or extension cables which comply with the current safety standards, and make sure not to exceed the voltage limit of the adapter or extension cable. · When the appliance is plugged into the electrical socket and whilst switched on never place hands into the bread toasting slots. 5 Toster CTM 2023/4023 · Never allow the appliance to be used by children or used without adult supervision. · The metal sides of the toaster and the areas surrounding the bread slots become very hot during use: operating the toaster should be carried out touching only the plastic dials and handles. Do not use this appliance under or next to curtains or other combustible material. · Unplug the appliance from the electrical socket when it is not in use. · Do not unplug the appliance from the outlet by pulling on the cord. · Do not leave the appliance exposed to the elements, (rain, direct sunlight, frost, etc. ). · Before doing any cleaning unplug the appliance from the electrical socket. [. . . ] The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician. Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size. [. . . ]