User manual DELONGHI CORTINA BCO 250

[. . . ] Do not touch hot parts (steam tube, area around the filter-holder and filter). Do not remove the filter-holder when the appliance is producing steam or hot water. Do not leave water in the machine when the room temperature is OQC or below. If in doubt, do not use the applian­ ce; contact a qualified technician. [. . . ] This bring s the machine back to the opti mum tempera ture for making coffee. €¢ Top quality beans, correctly roasted and ground, will always produce the best coffee. Procedure • • • • • • • • • • • Switch on the machine by pressing the ON/OFF switch (8) and wait until the OK pilot lamp lights. Insert the Never Fail Crema system in the filter holder as explained above; then insert the 1or 2-cup filter. 9) spreading it evenly and pressing down lightly with the tamper (fig. Place the pre-warmed cup or cups on the drip tray under the filter holder spouts. When the desired quantity of coffee is obtai­ ned (generally 20 - 30 seconds), turn the deli­ very switch off (fig. Wait a few seconds before detaching the filter holder by turning the handle from right to left. To remove the used coffee grounds, retain the filter in position using the special lever fitted to the handle (fig. If you want to remove the Never Fail Crema system, turn the filter holder face-down and knock the system out. The removal of the Never Fail Crema system must be carried out when the filter is cold. If the machine is not to be used for a long time, turn it off and empty the water tank. A pre-wash should be performed, as descri­ bed above, before using it the next time. Do not fill to more than 1/3rd, otherwise the milk may overflow when it boils. €¢ • Switch the machine on by pressing the "ON/OFF" switch (8). After about 3 minu­ tes, the OK pilot lamps (9 and10) lights to indi­ cate that the machine has reached the correct temperature for the generation of steam (fig. When using the steam function, a few drops of water may escape from the nozzle: this is completely normal. 14) and turn the steam knob gradually counterclockwise until steam is produ­ ced. Adjust the position of the knob to regulate the quantity of steam delivered by the nozzle. Ower the container until the tube skims the sur­ face of milk, immersing the tube slightly from time to time for a few seconds (fig. If your coffee machine is equipped with a cap­ puccino nozzle, immerse the nozzle into the milk down to the mark on the "cappuccino" nozzle (fig. For a few moments, the steam will come out mixed together with a little water. [. . . ] If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below. WARNING: Very carefully dispose of the cut off plug after remo­ ving the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 1 5 Amp fuse. If the plug is a mo� lded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. [. . . ]