User manual DELL 2300MP

[. . . ] Dell 2300MP Projector Dell™ 2300MP Projector Safety Instructions (Read before connecting the projector) About Your Projector Installation Using Your Projector Troubleshooting Specifications Regulatory Notices Contacting Dell Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your projector. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Dell Inc. [. . . ] When an icon is selected, the color of the icon will change to dark blue. Adjusting the settings of White Intensity or Degamma tab, will select User Mode automatically.   White Intensity White Intensity can be adjusted between 0 and 10. file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Setting 10 will maximize the brightness. Adjustment of the setting will change the color performance of the display. Audio Menu Audio   Volume Press Press     Mute to decrease the volume. to increase the volume. file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Select the left icon to mute the volume.   Management Menu Management   Menu Location Select the location of the OSD on the screen.   Projection Mode file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Front Projection-Desktop The default setting. Rear Projection-Desktop The projector reverses the image so you can project from behind a translucent screen. Front Projection-Ceiling Mount The projector turns the image upside down for ceiling-mounted projection. Rear Projection-Ceiling Mount The projector simultaneously reverses and turns the image upside down. You can project from behind a translucent screen with a ceiling-mounted projection.   Signal Type Manually select signal type RGB, YCbCr, YPbPr.   Lamp Reset Use this function only after a new lamp is installed in the projector. Select the left Lamp Reset icon (light bulb and arrow under the icon), and press the Enter button to reset the lamp timer. Power Saving Menu Power Saving file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Use this function to select the power saving delay period.   Set Time (Min) Set the power saving delay period as you prefer. When the projector is not receiving an input signal for the selected period of time, the projector will automatically enter power saving mode, and turn off the lamp. After a one-minute cooling period, the projector will turn back on with detection of an input signal or by pressing the "Power" button. After two hours the projector will turn off and must be turned on by pressing the power button on the control panel or remote.   Auto Source The projector will always automatically search for available input signals when Auto Source is On, which is the default setting. Press the Source button with Auto Source On to automatically search for the next available input signal. Set Auto-Source to Off to step through the different input signals manually.   Eco Mode Select On to operate the projector in lower power (150 Watts) for providing longer lamp life and quiter operation with dimmer luminance output on the screen. Language Menu file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Language   Language Press or to select the preferred language. [. . . ] Vincent Lin Head of RD Center Canadian Regulatory Information (Canada Only) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Note that Industry Canada regulations provided, that changes or modifications not expressly approved by Dell Inc. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. [. . . ]