User manual DEGEN DE1102

[. . . ] Note These warning signs are here to prevent injury to you and others. After reading this section, keep it in a safe place for future reference. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your microwave oven’s many benefits and features. [. . . ] Cover the plate with vented plastic wrap or waxed paper tucked under the plate. If the food is not as hot as you would like after using the Sensor Reheat function, continue heating using additional time and power. If the food is not as hot as you would like after using the “Sensor Reheat” function, continue heating using additional time and power. Pasta: canned spaghetti and ravioli Dinner plate 1 serving (1 plate) 02 U Casserole Pasta 1 to 4 servings sing y our m Auto Defrost button To thaw frozen foods, enter the weight of the food, and the microwave automatically sets the defrosting time, power level and standing time. The oven will beep and the display will read TURN THE FOOD OVER twice during the defrosting process. Icrowa ve ov en Auto defrosting table Food Amount Follow the instructions below when defrosting different types of food. After each stage, turn the food over and shield any warm portions with narrow strips of aluminum foil. If there are any warm or thawed portions of food, shield them with narrow, flat pieces of aluminum foil. After each stage, remove any pieces of food that are nearly defrosted. After the first stage, turn the chicken over and shield any warm portions with narrow strips of aluminum foil. After the second stage, again shield any warm portions with narrow strips of aluminum foil. One-stage cooking For simple one-stage cooking, you only need to set the cooking time. If you want to set the power level to any other level, use the Power Level button. You can enter a time from one second right up to 99 minutes and 99 seconds. If you want to set the power level to a level other than High, press the Power Level button and use the number buttons to enter the power level. If you want to change the power level, press the Stop/Clear button before you press the Start button, and enter all the instructions again. Some recipes require different cooking stages at different temperatures. Follow steps 1 and 2 from the “One-stage cooking” section. Press the Power Level button, then use the number buttons to set the power level for the second cooking stage. The display shows the selected power level and then displays PRESS START OR ENTER NEXT STAGE COOKING TIME. Press the Start button to begin cooking, or repeat steps 2 and 3 to set a cooking time and power level for a third cooking stage. Indd 15 2012-02-24 1:58:45 Power Levels The 10 power levels allow you to choose the optimal power level for your cooking needs. [. . . ] solution Make sure the plug is properly connected to a grounded outlet. If the wall outlet is controlled by a wall switch, make sure the wall switch is turned on. Remove the plug from the outlet, wait ten seconds, and plug it in again. If the other appliance doesn’t work, call a qualified electrician to repair the wall outlet. [. . . ]