User manual DECATHLON DC-10R

[. . . ] 9 Using the Web Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TCP/IP Printing for Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 TCP/IP Printing for Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 TCP/IP Printing for Windows 98SE/ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You will need this information later in the configuration process. 26 TCP/IP Printing for Windows XP (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown. ) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make a note of the IP Address. ) 27 TCP/IP Printing for Windows XP (continued) Go to Start > Settings > Printers and Faxes > Add a Printer Click Next 28 TCP/IP Printing for Windows XP (continued) Select Local Printer Deselect Automatically detect and install my Plug and Play printer. Click Next Select Create a new port. At the pull-down menu, highlight Standard TCP/IP Port. Click Next Click Next 29 TCP/IP Printing for Windows XP (continued) Type in the IP address of the Print Server (i. e. The Port Name will automatically be filled in. Select Custom Then click Settings Select LPR Input the Port Name of the port being used by the printer. Click OK 30 TCP/IP Printing for Windows XP (continued) Click Next Click Finish Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next 31 TCP/IP Printing for Windows XP (continued) At this screen, you can input a name for the printer. Click Next Click Next Click Finish 32 TCP/IP Printing for Windows 2000 Open the web browser, and type in the IP Address of the DC-10R. For example, type http://192. 168. 0. 10 into the Location or Address field. Note: The PC's IP Address must be in the same subnet as the Print Server's IP Address for the two devices to communicate. (For example, if your Print Server's IP Address is 192. 168. 0. 10, with a subnet mask of 255. 255. 255. 0, then your computer's IP Address should be 192. 168. 0. x, where x is a value between 1-254, excluding 10. ) D-Link DP-301U 33 TCP/IP Printing for Windows 2000 (continued) At the Configuration window, write down the Port Names for future reference. You will need this information later in the configuration process. 34 TCP/IP Printing for Windows 2000 (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown. ) If you need to make changes, make sure to click Apply after you have made the changes. In this example, AppleTalk has been selected. PS - 1123D6-U1 Laserwriter AppleTalk protocol: After selecting AppleTalk the Port Name of the Print Server will be displayed. Click on the Port to which the post-script printer is connected. PS - 1123D6-U1 Laserwriter Then select the printer model from the dialog box displayed here. Click Print to print your document. 57 Setting up Apple Talk or LPR Printing in Mac OS X (continued) LPR Printers using IP protocol: When you select LPR Printers using IP Protocol, this window will appear. Type the IP Address of the Print Server into the LPR Printer's Address field. PS-1123D6 - U1 In the Queue Name field, type in the Port Name of the post-script printer that is connected to the Print Server. In the Queue Name field, type in the Port Name of the post-script printer that is connected to the Print Server. Close all Print Center windows, select the Printer Port that was just selected. Click Print to print the document. Click Add and the process is complete. 58 Setting up Apple Talk Printing in Mac OS 9 Note: Mac OS printing is supported for Postscript printers only!The AppleTalk network protocol is used with computers using the MacOS operating system. It can be used for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport, or over a proprietary low-speed LocalTalk transport. Your Print Server can be used for network printing to PostScript printers. You can print from any MacOS computer connected to your Ethernet network, either directly using an EtherTalk connection, or indirectly through a LocalTalk-to-EtherTalk router. [. . . ] The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link's reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. [. . . ]