User manual DATAVIDEO TLM-702HD

[. . . ] 6 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Opening or removing covers that are marked "Do Not Remove" may expose you to dangerous voltage points or other risks, and will void your warranty. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a. When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product exhibits a distinct change in performance, indicating a need for service. 3 Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this warranty. All mail or transportation costs including insurance are at the expense of the owner. Two Year Warranty All Datavideo products purchased after 01-Oct. -2008 qualify for a free one year extension to the standard Warranty, providing the product is registered with Datavideo within 30 days of purchase. For information on how to register please visit www. datavideo-tek. com or contact your local Datavideo office or authorized Distributors Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10, 000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires. Disposal For EU Customers only - WEEE Marking This symbol on the product indicates that it should not be treated as household waste. It must be handed over to the applicable take-back scheme for the recycling of waste electrical and electronic equipment. For more detailed information about the recycling of this product, please contact your local Datavideo office. Packing List Items 1 2 3 4 5 6 Description TLM-702HD AC Power Cord 1. 5 Hex Wrench 2. 5 Hex Wrench Switching Adaptor DC 12V/30W User's Manual Q'ty 1 1 1 1 1 1 4 Introduction The Datavideo TLM-702HD is a 19" rack mountable dual 7" TFT Monitor. The all metal construction makes the TLM-702HD robust and durable, and the 12V DC power requirements make it easy to power in the field. The high resolution TFT screens have a wide viewing angle and feature NTSC / PAL auto detection. Features 2 x 7" 16:9 Wide Screen Panels Resolution: 800 x 480 dots View Angle (V)+60/-40°, (H)+60/-60° HD/SD-SDI, YUV, HD-YUV, HDMI & CV Input Internal colour bar Blue only function Embedded Audio indicator for SDI, HDMI signals Safe Area indicator VITC time code display Dual colour tally light indicator Brightness, Contrast, Colour, Tint Adjustable Colour Temp* Adjustable Audio Level indicators NTSC / PAL Auto Switching 4:3 / 15:9 / 16:9 switchable * Colour Temp can be set to 9300, 7500, 6500, 5400 or User RGB values Supported Formats · HDMI YUV - 720 x 576i x 50 Hz - 720 x 480i x 60 Hz - 1280 x 720p x 50 Hz - 1280 x 720p x 60 Hz - 1920 x 1080i x 50 Hz - 1920 x 1080i x 60 Hz · SDI - 720 x 576i / 50 Hz - 720 x 480i / 60 Hz - 1280 x 720p / 60 Hz - 1280 x 720p / 50 Hz - 1920 x 1080i / 50 Hz - 1920 x 1080i / 60 Hz · CV - 720 x 576i (PAL) - 720 x 480i (NTSC) · HDMI RGB - 720 x 576i x 50 Hz - 720 x 480i x 60 Hz - 1280 x 720p x 50 Hz - 1280 x 720p x 60 Hz - 1920 x 1080i x 50 Hz - 1920 x 1080i x 60 Hz · YUV - 720 x 576i x 50 Hz - 720 x 480i x 60 Hz - 1280 x 720p x 50 Hz - 1280 x 720p x 60 Hz - 1920 x 1080i x 50 Hz - 1920 x 1080i x 60 Hz 5 Connections & Control Front Panel Power Switch Switches the power On / Off. Stereo Headphone Mini Jack socket The level is adjusted by headphone volume control. Aspect Ratio Button Sets the LCD aspect ratio to 4:3, 15:9, or 16:9 PATTERN The PATTERN button will generate colour bars on the screen. BLUE Press this button to eliminate the red and green component of input signals. MENU Calls up the on-screen adjustment menu (See Menu Options for more details). UP / DOWN Navigate the on-screen menu and set the functions & levels. ENTER Confirms the new settings or return to the default state. 6 Rear Panel HD/SD - SDI input BNC connector for SDI Input. YUV input BNC connectors for analogue (Component) video inputs. Composite Video input BNC connector for analogue (Composite) video inputs. [. . . ] - Press the ENTER button again, the screen image will return to normal view. NB: This option will return the monitor to the factory default settings. - Press the ENTER button to re-start the monitor with the factory default settings. - Press the ENTER button, the firmware version will be displayed on screen. [. . . ]