User manual DATAVIDEO DAC-10
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DATAVIDEO DAC-10. We hope that this DATAVIDEO DAC-10 user guide will be useful to you.
 |
DATAVIDEO DAC-10 : Download the complete user guide (374 Ko) |
Manual abstract: user guide DATAVIDEO DAC-10
Detailed instructions for use are in the User's Guide.
[. . . ] 1. AUDIO ENCODE
Encode analog audio to DV with your choice of 12 bit/32Khz or 16bit/48Khz. When it is red, the Analog S (Y/C) video input is enabled When another input is enabled this switch will turn green. [. . . ] Note: You can hook up all the cables onto all video/audio output connectors at same time without conflicting to each connection 6. DV IN/OUT JACKS (Two) 6 pin DV (FireWire, iLink, IEEE 1394) cable, from the DV port of a camcorder, DV Bank, DV deck, etc. DIP SWITCH MODE SETTING Please refer to next page the DIP Switch setting. BLACK BURST SIGNAL OUTPUT Video Black Burst Signal to be used as a sync reference source 9. OUTPUT JACKS PLA Mode: Comply to SMPTE spec NTSC Mode: Comply to Sony Betacam spec 2
Dip Switch Setting for Mode Select:
*. Note1Mode DIP switch (Reboot the DAC-10 if you change a DIP Switch) S1. Locked Audio Mode S3 -- OFF: Locked Audio S3 ON: Unlocked Audio S4 & S5 for NTSC and PAL video system ON MAC OS S5 ON S4 OFF Windows 2000 and Windows 98 ON Windows XP and Windows ME S5 OFF S4 OFF Camera *. Uncheck "Abort capture on time code break" for Final cut pro 3. 0 5). Click OK button
3
Dip Switch Setting to work with Windows & MAC Operation system
The DAC-10 has dip switches 4 and 5 that control the clocking frequency when it is converting video, if the dip switches are not configured for your operating system or type of device, a loss in video can occur. Please refer to dip switch chart below and make sure that your DAC-10 is setup correctly.
NTSC System (USA) MAC OS
NTSC System (USA) Windows 2000 and Windows 98
NTSC System (USA) Windows XP and Windows ME
NTSC System (USA) Camera
PAL System (USA) MAC OS
PAL System (USA) Windows 2000 and Windows 98
PAL System (USA) Windows XP and Windows ME
PAL System (USA) Camera
4
5
Operation Procedure:
Step_1. If the video source is analog, select the desired audio sampling Rate Step_5. If needed, calibrate the playback video and audio output level Step_7. [. . . ] 2F-D, 2 Lane 777, West Guangzhong Rd, Zhabei District, Shanghai, China Tel: +86 21 5603 6599 www. datavideo. cn
Datavideo Technologies (S) PTE Ltd. 100 Lor 23, Geylang Rd, #01-03 D'Centennial, Singapore 388398 Tel: +65 6749 6866 www. datavideo. sg
8
All the trademarks are the properties of their respective owners. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DATAVIDEO DAC-10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DATAVIDEO DAC-10 will begin.