User manual DANE-ELEC MINIPLAYER SLIM QUICK START GUIDE

[. . . ] To protect the player from scratching, the surface of the front panel is attached with a transparent protection film. Power On Long click the Power ON/OFF button, the power comes on and MEIZU logo appears. Unlock Locked By turning Hold ON, all the keys on the player will not function. Long Click 5. To adjus t the volum e in the music operation menu, sliding your finger on the touch keypad. [. . . ] Tap the center of keypad to enter the submenu, or conduct an operation. Clicking Menu key to go back to the previous menu interface or cancel an operation. Click Next button to enter the submenu while setting EQ. Click 10. Click and hold the Next key and then hold the power ON/OFF button, do not remove your finger until it appears the yellow screen. Click and hold the Previous key and then hold the power ON/OFF button, do not remove your finger until it appears the purple screen. After 2 seconds, it appears the green screen, then it initializes the OS to the original factory settings. After finish this, you may need to download the firmware package from internet and operate the upgrading. www. danedigital. com Important Cautions Package Contents Installation CD System Requirement Pentium 133MHz or Higher 32MB Main Memory or Higher 40MB Hard Disk Space or More CD-ROM Drive USB Port (2. 0) Windows 98SE/ ME / 2000 / XP Install Software · · · · · · · Connecting Mini Player Precautions for Using the Product Turn On / Auto Power Off To power on the player, make sure it has enough power, long press the Power On/Off button for over 3 seconds. When there is no button operation for about 3 minutes while the player is stopped, it is automatically turned off. To power off the player, press and hold the Power On/OFF button until it finishes with shutting down procedure. Reset Mini Player When it is dead caused by improper operation, you have to reset your mini player. Disconnect it to a USB cable or AC Adapter, press and hold on the Power button( ) key for over 12 seconds to reboot. Update Music Library After finish copying the music, using Main Menu-Music-Update Music Library on the player before your listening music so that you can organize and assort them by artist, album or genre. Otherwise, you can only browse the new copied songs from All Songs on the player. Initialize OS to the Original Factory Settings When it is not able to turn on and disable connecting the player to your PC after resets, please click and hold the Next key ( ) and Power On/OFF button for about 8 seconds to initialize the OS to the original factory settings. All data will be deleted in the player. Congratulations on the purchase!The Meizu's home page provides the overview of company and products, other related information, and answers to common questions. Firmware and software updates are also available as well as the most recent information about your Meizu product. Stand Accessories Provided into the package: Connecting to a Computer Connect the small end to player, large end to PC. [. . . ] Turn it on before your connecting Power it on, then connect the player to the computer using the USB cable supplied in the package. Connecting to a computer during it power on, it will charge its built-in battery and appears as the left figure. Note: While connecting to PC, tracks and operations cannot be applied. Pulling out the PC connection cable from the player before your listening to music or viewing a picture and so on. [. . . ]