User manual DAHON TIAGRA FD-4400 TECHNICAL SERVICE INSTRUCTIONS

[. . . ] Technical Service Instructions SI-5EV0B Front derailleur t FD-4400 General Safety Information WARNING · Obtain and read the service instructions carefully prior to installing the parts. [. . . ] · Parts are not guaranteed against natural wear or deterioration resulting from normal use. · For maximum performance we highly recommend Shimano lubricants and maintenance products. · For any questions regarding methods of installation, adjustment, maintenance or operation, please contact a professional bicycle dealer. In order to realize the best performance, we recommend that the following combination be used. Series Shifting lever Outer casing Gears Front derailleur Front chainwheel Bottom bracket Rear derailleur Freehub Cassette sprocket Chain Bottom bracket cable guide TIAGRA ST-4400 / ST-R600 / SL-7700 / SL-R440 SP40 18 FD-4400 FC-4401 BB-ES51 / BB-ES30 RD-4400-SS FH-4400 CS-HG50-9 CN-HG53 SM-SP17 Specifications Type Front derailleur installation band diameter Chainstay angle (C) Chain line Band type / Brazed on type S (28. 6mm), M (31. 8mm) 61° - 66° 43. 5mm Installation of the front derailleur 1. Adjust so that the clearance between the chain guide outer plate and the large gear is 1 - 3 mm before installing. Clearance: 1 - 3 mm Chain guide outer plate A-53 2. The level section of the chain guide outer plate should be directly above and parallel to the largest chainring. Secure using a 5mm Allen key. Tightening torque: 5 - 7 N·m {44 - 60 in. lbs. } Chainwheel (largest chainring) SG Chain guide SIS adjustment 1. Low adjustment Set so that the clearance between the chain guide inner plate and the chain is 0 - 0. 5 mm. [. . . ] Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan Please note: specifications are subject to change for improvement without notice. [. . . ]