User manual DAHON CIAO 2009

[. . . ] Failure to follow the installation instructions may cause serious bodily injury and will void any warranties, expressed or implied. function: The function of the ATS System includes: - The ability to micro-adjust your stem height easily. [. . . ] The stem then slides over the shim and is tightened along the shim length (Fig. To adjust the stem, simply loosen the stem bolt, move the stem to your selected position, then retighten the stem bolt. Determine where to cut steer tube by sliding the ATS shim over steer tube and resting it against the completely installed headset. Be sure to compensate for this added height when determining where to cut your steer tube. If the shim extends longer than this distance, then the ATS shim needs to be cut. Some carbon steer tube compression devices may need to be removed completely then reinstalled after the steerer is cut. Clamp the ATS shim cutting tool over the shim and steer tube with the saw blade slot over the cut mark (Fig. The NVO stem should never be clamped less than 1mm below the top of the ATS shim. If you experience any looseness in the steering, loosen the rear stem clamp bolt before adjusting headset preload. Warranty Claim Requirements: To obtain warranty service, you must have your original sales receipt. [. . . ] If you experience any looseness in the steering, loosen the rear stem clamp bolt before adjusting headset preload. Warranty Claim Requirements: To obtain warranty service, you must have your original sales receipt. [. . . ]