User manual DAHON CB-E110 TECHNICAL SERVICE INSTRUCTIONS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DAHON CB-E110. We hope that this DAHON CB-E110 user guide will be useful to you.
 |
DAHON CB-E110 TECHNICAL SERVICE INSTRUCTIONS: Download the complete user guide (131 Ko) |
Manual abstract: user guide DAHON CB-E110TECHNICAL SERVICE INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] General Safety Information
WARNING
To avoid serious injuries:
Note:
Note:
Sprocket
NOTE:
Check that the snap ring is sitting securely in the groove of the hub body.
Groove of hub body
It is important to completely understand the operation of your bicycle's brake system. Improper use of your bicycle's brake system may result in a loss of control or an accident, which could lead to sever injury. [. . . ] Read these Technical Service Instructions carefully, and keep them in a safe place for later reference.
The CB-E110 should be used with Sprockets from 15T to 23T. If the wheel becomes stiff and difficult to turn, you should lubricate it with grease. Do not apply any lubricant to the inside of the hub, otherwise the grease will come out. You should periodically wash the sprockets in a neutral detergent and then lubricate them again. In addition, cleaning the chain with neutral detergent and lubricating it can be a effective way of extending the useful life of the sprockets and the chain. If the chain keeps coming off the sprockets during use, replace the sprockets and the chain. Parts are not guaranteed against natural wear or deterioration resulting from normal use. For maximum performance we highly recommend Shimano lubricants and maintenance products. For any questions regarding methods of handling or adjustment, please contact the place of purchase.
Check that the right end of the Hub axle protrudes from the edge of the flange nut or hub nut by at least 2 mm.
Sprocket
Thread should be visible
Snap ring
Hub axle Flange nut Fork end
Installation of the hub to the frame
1. Mount the chain on the sprocket, and then set the hub axle into the fork ends.
Hub axle Fork end
Overall dimensions of fork end, stand and mudguard stay (Varies depending on the bicycle)
brake arm 4. [. . . ] Please note: Specifications are subject to change for improvement without notice. (English)
®
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
C Mar. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DAHON CB-E110
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DAHON CB-E110 will begin.