User manual DAEWOO ELECTRONICS DTB-21U7 NS

[. . . ] DTB-21U7 S DTB-21U7 NS ADDITIONAL INFORMATION FOR TV'S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the same colour as the original. If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any other reasons, then the fuse should be removed and the cut off plug disposed of safely to prevent the hazard of electric shock. [. . . ] For DTB-21U7 S - Select "preset" function to adjust sound properties: Using the remote control CURSOR LEFT (A7) or RIGHT (A20) buttons, you can choose between 2 user-definable set-ups: favourite 1, favourite 2 and 3 pre-defined equalizer set-ups: music, speech, normal. Selecting "favourite 1" allows you to adjust the five equalizer bars: 120Hz, 500Hz, 1500Hz, 5000Hz, 10KHz. The levels you select are automatically stored in "favourite 1". SOUND VOLUME BALANCE PRESET 120HZ 500HZ 1500HZ 5000HZ 10KHZ FAVOURITE 1 For DTB-21U7 NS Selecting "favourite 2" allows you to adjust bass and treble levels. The levels you select for bass and treble are automatically stored in "favourite2". The levels that you select are automatically stored. SOUND VOLUME BALANCE PRESET BASS TREBLE FAVOURITE 2 VOLUME BASS TREBLE BALANCE SOUND 8 INSTALL MENU (For operating instructions, see " HOW TO USE THE SUB-MENUS ") Automatic tuning system Program list edition TV system modification Channel number Channel Frequency Channel name Program number Program storage number ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO INSTALL GB GB C47 679, 25 ABCDE 00 00 Country TV system Channel number Channel Frequency Channel name Program number Program storage number Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the satellite decoder and tune Sky News before starting ATSS. The ATSS function has started when the phrase "Please Wait!" appears (in red characters) in the help instructions box, below the Install menu. When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic tuning finished, press the remote control MENU button (A19)) Program List Edition This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below. Program number Station name PR 03 02 01 00 99 98 97 NAME ITV BBC2 BBC1 ------------CH C23 C33 C26 S41 S41 S41 S41 EDIT SKIP Channel number Skip code : Program skipped Nothing : Program not skipped PR To enter the EDIT menu: From Install menu, select "Edit", and press the OK button (A18): the EDIT menu appears. The current program being displayed is highlighted in blue (on the central line). Any program from 00 to 99 can be selected, by using the remote control CURSOR UP (A6) / DOWN (A21) buttons. The memorised programs can be modified as follows : MENU PR Channel skipping - You can select skip "YES" or "NO" using the remote control RED "Skip" button (A11). A program with skip "YES" doesn't appear on screen when changing channels with the PROGRAM UP (A6) / DOWN (A21) buttons. PR Channel deleting - Select the program to delete using the remote control CURSOR UP (A6) / DOWN (A21) buttons. The deleted program is moved to program number 99 with skip changed to "YES". The existing 99 program is moved to program number 98 and so on. PR Channel order changing - Select the program to move using the remote control CURSOR UP (A6) / DOWN (A21) buttons. - Press the remote control GREEN "Move" button (A12): the program line is highlighted in red, and can be moved to another position using the remote control CURSOR UP (A6)/ DOWN (A21) buttons. - When the desired position is reached, confirm the new position pressing the remote control GREEN "Confirm" button (A12). Then the program line returns again to blue. PR MENU MENU PR MENU PR PR 9 Manual Channel Tuning Choose a starting point - Select with "Program" the program from which you want to start manual tuning. Then the channel number, the frequency, the name and the program number of this program are displayed in the Install menu. PR OK Channel searching - Select the "Frequency" function. - Press, and hold for more than 2 seconds, the remote control CURSOR RIGHT (A20) [LEFT (A7)] buttons to start up [down] manual tuning. - Searching will stop automatically at the next channel found (to stop tuning, press the remote control MENU button (A19)). Note: You can directly locate a program by entering the data into the "channel" or the "frequency" function. Enter station name It is possible to enter your own choice of name for each program. If none exists "- - - - -" will be shown in the Install menu, and program status display ( see the section PROGRAM STATUS DISPLAY on page 10). - Select one of the 5 character positions by using the remote control CURSOR RIGHT (A20) / LEFT (A7) buttons to move the cursor. [. . . ] - Alternatively, the YELLOW "Up" (A26), GREEN "Down" (A12), and CYAN "Left" / "Right" (A25) keys are available - To request the teletext page you have selected, use the remote control RED "OK" (A11) key. Startseite Nachrichten Europa Presseschau Sport Index Impressum TOP VIDEOTEXT OK USEFUL TELETEXT FUNCTIONS INDEX button (A18): Allows you to return directly to the initial teletext page. PAGE HOLD button (A9): Any teletext page or subpage can be held on the screen by pressing the PAGE HOLD button. - "HOLD" will appear in the top left hand corner of the screen. - Press the HOLD button again to cancel hold mode. SUBPAGE button (A10): Allows you to request a specific subpage: - Press the SUBPAGE button (A10). [. . . ]