User manual D-LINK WEB SMART SWITCH QUICK GUIDE

[. . . ] The switch can be mounted in an EIA standard size 19inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets to the switch's side panels (one on each side) and secure them with the screws provided. Please consult the packing list located in the User Guide to make sure all items are present and undamaged. [. . . ] Using the SmartConsole Utility, you don't need to change the IP address of your PC and it is easy to start the initial setting of multiple Smart Switches. In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same range as the switch. Z (where x/y is a number between 0 ~ 254 and z is a number between 1 ~254), and a subnet mask of 255. After a successful physical installation, you can configure the switch, monitor the LED panel, and display statistics graphically using a web browser, such as Netscape Navigator (version 6. You need the following equipment to begin the web configuration of your device: A PC with a RJ-45 Ethernet connection A standard Ethernet cable The web configuration can also be accessed through the SmartConsole Utility. open the SmartConsole Utility and double-click the switch as it appears in the Device List. This will automatically load the web configuration in your web browser. When the following logon box appears, enter "admin" for the password. Connect the Ethernet cable to any of the ports on the front panel of the switch and to the Ethernet port on the PC. Before entering the Web-based Management, the Smart Wizard will guide you to quickly configure some functions, such as Password Settings, SNMP Settings, and System Settings. If you don't plan to change anything, click Exit to exit the Wizard and enter the Webbased Management. Just connect the Smart Switch to the same L2 network segment of your PC and use the SmartConsole Utility to discover the Smart Switches. Users may also access the switch through Telnet using your PC's Command Prompt. To access it from your computer, users must first ensure that a valid connection is made through the Ethernet port of the Switch and your PC, and then click Start > Programs > Accessories > Command Prompt on your computer. You should be directed to the opening console screen for the Command Line Interface of the switch, enter the "admin" for the default user name and password for the Switch and press the Enter key. The SmartConsole Utility included on the installation CD is a program for discovering Smart Switches with the same L2 network segment connected to your PC. [. . . ] If you are encountering problems setting up your network, please refer to the user manual that came with the switch. It contains many more rules, charts, explanations, and examples to help you get your network up and running. Additional help is available through our offices listed at the back of the user manual or online. [. . . ]