User manual D-LINK DXS-3300 COMMAND LINE INTERFACE REFERENCE GUIDE

[. . . ] CLI Manual Product Model : xStackTM DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch Release 4. 30 ©Copyright 2006. All rights reserved. xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using the Console CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] DGS-3324SRi:4# Only administrator-level users can issue this command. delete authen server_group Purpose Syntax Description Parameters Restrictions Used to delete a user-defined authentication server group. delete authen server_group <string 15> This command will delete an authentication server group. <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group to delete. 171 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual Example usage: To delete the server group "group_1": DGS-3324SRi:4#delete server_group group_1 Command: delete server_group group_1 Success. DGS-3324SRi:4# show authen server_group Purpose Syntax Description Used to view authentication server groups on the Switch. show authen server_group <string 15> This command will display authentication server groups currently configured on the Switch. This command will display the following fields: Group Name: The name of the server group currently configured on the Switch, including built in groups and user defined groups. Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group to view. Entering this command without the <string> parameter will display all authentication server groups on the Switch. Restrictions None. DGS-3324SRi:4#show authen server_group Command: show authen server_group Group Name IP Address Protocol -----------------------------------radius ---------------------------------------Darren 10. 53. 13. 2 TACACS tacacs 10. 53. 13. 94 TACACS tacacs+ ---------------------------------------xtacacs ---------------------------------------Total Entries : 4 DGS-3324SRi:4# config authen parameter response_timeout Purpose Syntax Description Used to configure the amount of time the Switch will wait for a user to enter authentication before timing out. config authen parameter response_timeout <int 0-255> This command will set the time the Switch will wait for a response of authentication from the user. 172 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual config authen parameter response_timeout Parameters response_timeout <int 0-255> - Set the time, in seconds, the Switch will wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. An entry of 0 will denote that the Switch will never time out while waiting for a response of authentication. Only administrator-level users can issue this command. Restrictions Example usage: To configure the response timeout for 60 seconds: DGS-3324SRi:4# config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 Success. DGS-3324SRi:4# Example usage: To configure the response timeout to never time out: DGS-3324SRi:4# config authen parameter response_timeout 0 Command: config authen parameter response_timeout 0 Success. DGS-3324SRi:4# config authen parameter attempt Purpose Syntax Description Used to configure the maximum number of times the Switch will accept authentication attempts. config authen parameter attempt <int 1-255> This command will configure the maximum number of times the Switch will accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be denied access to the Switch and will be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds before another authentication attempt. parameter attempt <int 1-255> - Set the maximum number of attempts the user may try to become authenticated by the Switch, before being locked out. Only administrator-level users can issue this command. Parameters Restrictions Example usage: 173 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual To set the maximum number of authentication attempts at 5: DGS-3324SRi:4#config authen parameter attempt 5 Command: config authen parameter attempt 5 Success. DGS-3324SRi:4# show authen parameter Purpose Syntax Description Used to display the authentication parameters currently configured on the Switch. show authen parameter This command will display the authentication parameters currently configured on the Switch, including the response timeout and user authentication attempts. [. . . ] DGS-3324SRi:4# Only administrator-level users can issue this command. 352 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual rename Purpose Syntax Description Parameters To rename a file. rename <source_path_filename 64> <target_path_filename 64> This command is used to rename a filename located on the storage media accessory. <source_path_filename 64> - Enter the path and name of the file to be renamed. <target_path_filename 64> - Enter the new name and path of the file to be renamed. [. . . ]