User manual D-LINK DWR-921

[. . . ] Version 1. 00 | 11/05/2012 User Manual 4G LTE Router DWR-921 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DWR-921 User Manual i FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] ID: Specifies which rule to copy the selected Popular application settings to when you click the Copy to button. Incoming Ports: Specify the incoming port(s) to open when traffic comes over the Trigger port. Enable: Tick the checkbox to enable the specified rule. D-Link DWR-921 User Manual 37 Section 3 - Configuration QoS Engine The QoS Engine improves your online gaming or streaming media experience by ensuring that your game or media traffic is prioritized over other network traffic, such as FTP or Web. For best performance, use the Automatic Classification option to automatically set the priority for your applications. After modifying any settings, click Save Settings to save your changes. QOS ENGINE SETUP Enable QOS Packet Filter: Select this box to enable the QoS feature. Use Schedule Rule: Select a schedule to use and copy to the specified rule ID when you click the Copy to button. You may select Always On or use a specific schedule that you have defined. To create and edit schedules, please refer to “Schedules” on page 55. Local IP : Ports: Specify the local IP address(es) and port(s) for the rule to affect. Remote IP : Ports: Specify the remote IP address(es) and port(s) for the rule to affect. QoS Priority: Select what priority level to use for traffic affected by the rule: Low, Normal, or High. To create schedules, please refer to “Schedules” on page 55. D-Link DWR-921 User Manual 38 Section 3 - Configuration MAC Address Filter The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC Address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/ Internet access. After modifying any settings, click Save Settings to save your changes. MAC FILTERING SETTINGS MAC Address Control: Tick this box to enable MAC Filtering. Connection Control: Wireless and wired clients with C selected can connect to this device and allow/deny connections from unspecified MAC addresses. Association Control: Wireless clients with A selected can associate to the wireless LAN and allow/deny connections from unspecified MAC addresses. C: If this box is ticked, the rule will follow the connection control setting specified in MAC filtering settings specified above. If this box is ticked, the rule will follow the association control A: setting specified in MAC filtering settings specified above. D-Link DWR-921 User Manual 39 Section 3 - Configuration URL Filter URL Filter allows you to set up a list of websites that will be blocked from users on your network. After modifying any settings, click Save Settings to save your changes. [. . . ] Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. [. . . ]