User manual D-LINK DWL-700AP QUICK INSTALLATION GUIDE

[. . . ] This product can be set up using any current web browser, i. e. , Internet Explorer 6 or Netscape Navigator 6. 2. 3. DWL-700AP D-Link AirTM Wireless Access Point Before You Begin It's best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-700AP. [. . . ] Using a Ethernet cable, insert one end of the cable to the LAN port on the back panel of the DWL-700AP and the other end of the cable to a switch. Note: You also have the option of connecting the DWL-700AP directly to the computer that will be used for configuration. The Link LED light will illuminate to indicate a proper Ethernet connection. Computers with 802. 11b wireless adapters such as the DWL-650 Air Wireless Cardbus Adapter and the DWL-520 Air Wireless PCI Adapter can connect to the DWL-700AP. By default, the DWL-700AP SSID is set to `default' with a Channel setting of `6'. C. LAN Port This is the connection for Ethernet cables to your Ethernet-enabled device. Reset Button 2 A. Receptor for Power Adapter Using The Setup Wizard Open your Web browser and type "http://192. 168. 0. 50" into the URL address box. Then press the Enter or Return key. http://192. 168. 0. 50 The logon pop-up screen will appear. Type "admin" for the username and leave the password field blank. admin Click OK Once you have logged in, the Home screen will appear. Click Run Wizard 3 Using The Setup Wizard (continued) You will see the following screens. Click Next Step 1 - Set up your new password. [. . . ] D-Link Technical Support over the Internet: http://support. dlink. com email:support@dlink. com Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support. dlink. ca email:support@dlink. ca 8 [. . . ]