User manual D-LINK DSM-604H

[. . . ] Status Status light blinks steadily to indicate that it is functioning normally. Rear Panel Auto MDI/MDI-X LAN Port This port allows you to connect the DSM-602H/604H to your Ethernet network. Reset Button Pressing this button restores the DSM-602H/604H to its original factory default settings. Connector for Power Adapter. 5 Getting Started BEFORE YOU BEGIN. . . It is required that you have a DHCP server assigning IP addresses for initial configuration. Below is a sample network using the DSM-602H/604H. 20GB Digital Media Storage 40GB Digital Media Storage DSM-604H or 6 Hardware Installation 1 Connect the power adapter to the connector on the back panel of the DSM-602H/604H. Then plug the other end of the power adapter into a wall outlet or power strip. The Power LED will be ON to indicate proper operation. 2 Connect an Ethernet cable to the Ethernet jack located on the back of the DSM-602H/604H. 3 After the Ethernet cable is securely connected, connect the other end of the Ethernet cable to your network router or switch. 7 Accessing the DSM-602H/604H in Windows XP/Me We recommend that Windows XP or Me users activate UPnP for ease of TM use. [. . . ] If you are using a DHCP-capable gateway/router you will not need to assign static IP addresses. If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow these instructions: Go to Start. Double-click on Control Panel. 31 Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections. Right-click on Local Area Connections. Click on Properties. 32 Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP). Click Properties. In the window below, select Use the following IP address. For example, if one computer has an IP address of 192. 168. 0. 2, the other computers should have IP addresses that are sequential, like 192. 168. 0. 3 and 192. 168. 0. 4. The subnet mask must be the same for all the computers on the network). IP Address: e. g. , 192. 168. 0. 2 Subnet Mask: 255. 255. 255. 0 Default Gateway: Enter the LAN IP address of the router. Click OK. You have completed the assignment of a static IP address. (You do not need to assign a static IP address if you have a DHCPcapable gateway/router). 33 Networking Basics (continued) Checking the Network Connection by Pinging in Windows XP/2000 Go to Start > Run > type cmd. A good network connection will show four replies from the router, as shown. Checking the Network Connection by Pinging in Windows Me / 98SE Go to Start > Run > type command. A good netowrk connection will show four replies from the router, as shown. 34 Technical Specifications Standards IEEE 802. 3 IEEE 802. 3u UPnPTM (Windows/UPnPTM-enabled) Rendezvous (Mac OS X) Management Web-based - Internet Explorer 5. 0 or above, Apple Safari, Linux Nautilus, or Netscape 6. 2. x or above. DHCP Client LEDs Power HDD (Hard Drive Disk) LAN Status Temperature: Operating Temperature: 32°F to 149°F (0°C to 55°C) Storing Temperature: -4°F to 158°F (-20~70°C) Humidity: 5%~90% non-condensing Power Input: External Power Supply DC 5V, 2. 5A Safety & Emissions: FCC Part 15 Class B UL Physical Dimensions: L = 7. 56 inches (192mm) W = 4. 57 inches (116mm) H = 1. 18 inches (30mm) Weight: 0. 86 lbs (388g) Warranty: One year 35 echnical Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support. dlink. com email:support@dlink. com Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support. dlink. ca email:support@dlink. ca 36 Warranty (USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. ("D-Link") provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U. S. Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below applicable to the product type ("Warranty Period"), except as otherwise stated herein. 1-Year Limited Warranty for the Product(s) is defined as follows: · · · Hardware (excluding power supplies and fans) One (1) Year Power Supplies and Fans One (1) Year Spare parts and spare kits Ninety (90) days · · D-Link's sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. [. . . ] Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc. , as stipulated by the United States Copyright Act of 1976. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]