User manual D-LINK DP-300U

[. . . ] D-Link DP-300U Fast Ethernet Print Server Manual Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up the DP-301U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Port Name field will automatically be filled in. Click Next Select "Custom" Then click on Settings. 38 TCP/IP Printing for Windows 2000 (continued) Select LPR Input the Port Name of the port being used by the printer. Click OK Click Next Click Finish 39 TCP/IP Printing for Windows 2000 (continued) Highlight the printer, as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next At this screen, you can input a name for the printer. Click Next 40 TCP/IP Printing for Windows 2000 (continued) Select Do not share this printer Click Next Select Yes to print a test page Click Next Click Finish The printer is now ready for printing with Windows 2000 on your network. 41 TPC/IP Printing For Windows 98SE/ME Open the web browser, and type in the IP Address of the DP-300U. For example, type http://192. 168. 0. 10 into the Location or Address field. Note: The PC's IP Address must be in the same subnet as the Print Server's IP Address for the two devices to communicate. (For example, if your Print Server's IP Address is 192. 168. 0. 10, with a subnet mask of 255. 255. 255. 0, then your computer's IP Address should be 192. 168. 0. x, where x is a value between 1-254, excluding 10. ) D-Link DP-301U 42 TCP/IP Printing for Windows 98SE/ME (continued) At the Configuration window, write down the Port Name for future reference. The Port Name shown here is only an example. 43 TCP/IP Printing for Windows 98SE/ME (continued) When you select TCP/IP Protocol at the Network window, the screen below appears. (We recommend that you keep the default settings as shown. ) If you need to make changes, make sure to click Apply after you have made the changes. (You may wish to make a note of the IP Address. ) 44 TCP/IP Printing for Windows 98SE/ME (continued) Go to Start > Settings > Control Panel Double-click on Network Click Add Highlight Client Click Add 45 TCP/IP Printing for Windows 98SE/ME (continued) At this window, click Have Disk. 1. Select the letter representing the CD-ROM drive on your computer from the pull-down menu. Click OK 4 3 2 1 Click OK to accept the location of the file. 46 TCP/IP Printing for Windows 98SE/Me (continued) Click OK You should now be back to the Network Properties Page. Highlight LPR for TCP/IP Printing. Click Properties 47 TCP/IP Printing for Windows 98SE/ME (continued) Click Add Port Type in the IP Address of the DP-301U. (The Port Name at right is just an example. ) Click OK The Port name and IP Address will be displayed. (The Port Name at right is just an example. ) Click OK 48 TCP/IP Printing for Windows 98SE/ME (continued) Click OK Windows will ask for a restart. Click Yes 49 TCP/IP Printing for Windows 98SE/ME (continued) Once your computer has rebooted, click on Start > Settings > Printers > Add Printer When the Add Printer Wizard screen appears, Click Next. Select Network Printer. Click Next Type in the path if you know it, or Click Browse. 50 TCP/IP Printing for Windows 98SE/ME (continued) At the next screen, browse for the printer port. (The Port Name in this window is just an example. ) PS-1123D6-P1 Click OK If the network path is not specified, type in the IP Address of the DP-301U and the Port Name. (The Port Name shown at right is just an example. ) Select Yes or No, to answer the question: Do you print from MS-DOS based programs?If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next Click Next 51 TCP/IP Printing for Windows 98SE/ME (continued) Select Yes to print a test page. Click Finish Go to Start > Settings > Printers Check to see that your printer is installed. 52 Unix/Linux Printing Please refer to the PS Admin Manual on the CD included with your purchase for information on setting up the Print Server in Unix/Linux. 53 Setting up Apple Talk or LPR Printing in Mac OS X Note: Mac OS printing is supported by Postscript printers only!With Mac OSX you can use AppleTalk or LPR printers using IP protocols for printing through Print Servers. Follow the instructions below for setting up the Print After attaching the Print Server to your network using the directions provided in the Quick Installation Guide, change the IP Address of your Macintosh to access the Print Server's web configuration. Open your System Preferences window and Click Network. At the Configure pull-down menu, select Manually 54 Setting up Apple Talk or LPR Printing The default IP Address of the Print Server is 192. 168. 0. 10. Manually change your IP Address to 192. 168. 0. x, where x is any number between 1 and 254 (except 10 which is the IP Address of the Print Server. ) The IP Addresses and Subnet Mask shown here are examples only. in Mac OS X (continued) Select the AppleTalk tab in this window and check Make AppleTalk Active. 55 Setting up Apple Talk or LPR Printing in Mac OS X (continued) To print, open a document and select File > Print from the menu. Select Edit Printer List from the Printer dialog box. Click Add Printer 56 Setting up Apple Talk or LPR Printing in Mac OS X (continued) Select the printing protocol preferred, AppleTalk or LPR Printers using IP. In this example, AppleTalk has been selected. PS - 1123D6-U1 Laserwriter AppleTalk protocol: After selecting AppleTalk the Port Name of the Print Server will be displayed. [. . . ] What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link's judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED "AS-IS" WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. [. . . ]