User manual D-LINK DNS-313 QUICK INSTALL GUIDE

[. . . ] 1-BAY SATA NETWORK STORAGE ENCLOSURE DNS-313 Quick Installation Guide+ Installations-Anleitung+ Guide d'installation+ Guía de instalación+ Guida di Installazione+ Installatiehandleiding+ Instrukcja instalacji+ Instalacní pírucka+ Telepítési Segédlet+ Installasjonsveiledning+ Installationsvejledning+ Asennusopas+ Installationsguide+ Guia de Instalação+ + Vodic za brzu instalaciju+ Kratka navodila za uporabo+ Ghid de instalare rapid+ Quick Installation Guide DNS-313 1-BAY SATA NETWORK STORAGE ENCLOSURE Check Your Package Contents DNS-313 1-BAY SATA NETWORK STORAGE ENCLOSURE CD-ROM (D-Link Click'n Connect, Manual and Software) Ether (CAT5 UTP) Cable Power Adapter Quick Installation 1 Remove the D-Link Click and Connect CD. 2 A. [. . . ] \\192. 168. 0. 32\ by default), or using FTP, in which case the address is ftp://<IP address/ 4. Press and hold the button (with example a paperclip) until the power LED on the front panel starts flashing. Note: Resetting the DNS-313 to factory default will erase the current configuration settings. To re-configure your settings, log into the DNS-313 Web configuration or alternatively re-install the device using the DCC software supplied on the CD-Rom. The DNS-313 does not support external additional drives via the USB port. You can plug a USB cable into this port for connection into a computer in the event you would like to operate the device as a directly attached drive to your computer independent of the network. [. . . ] For further information, support, product drivers and manuals, please visit the D-Link website at www. dlink. eu. www. dlink. co. uk : 08456 12 0003 2 [. . . ]