User manual D-LINK DMC-810SC BROCHURE

[. . . ] With the D-Link 108G enhancement, the DWL-2100AP can achieve wireless speeds up to 108Mbps* in a pure D-Link 108G environment through the use of new wireless technologies such as Packet Bursting, Fast Frame, Compression & Encryption, and Turbo mode. These technologies enable a throughput high enough to handle video/audio streaming and future bandwidth-intense applications. The DWL-2100AP Wireless Access Point also supports SNMP v. 3 for better network management with the provided Wireless AP Manager software that manages network configuration and firmware upgrades. For Enterprise networks, the DWL-2100AP supports network administration and real-time network traffic monitoring via D-Link's D-View Network Management software. [. . . ] Any setting that has a checkmark next to it is applied to the device or saved to the configuration file. Refresh will revert to the actual device settings of the selected device(s). The open button is used to load a previously saved configuration file. After opening a configuration file, you must click the Apply button to save the settings to the selected device(s). The save button allows you to save a configuration file of the selected device settings. You cannot save a configuration file if you selected more than one device in the device list. DWL-100AP User Manual General When selecting multiple devices for configuration, some options are unavailable for configuration by default as noted(*) below: Device Name(*): This allows you to change the device name for the selected access point. This option should only be configured when one access point is selected for configuration. IP address and If you've selected one device for configuration and you want Subnet Mask(*): to change the IP address of the device, check the IP Address box. You ca then enter an IP address and Subnet Mask for the selected access point. This option should only be configurable when one access point is selected for configuration. WPA-PSK: Does not utilize a RADIUS server for authentication but uses a passphrase that is configured on the clients and access points. Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose. DWL-100AP User Manual 0 WEP Encryption Authentication Select from the pulldown menu the type of authentication to be used Type: on the selected device(s). Shared: Limited to communication with devices that share the same WEP settings. Open System/ Shared Key: The key is communicated and identical WEP settings are required. Active Key Index: Select which defined key is active on the selected device(s). Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose. DWL-100AP User Manual 1 WPA-EAP/WPA-EAP/ WPA-Auto-EAP Cipher Type: Select Auto, TKIP, or AES from the pulldown menu. Group Key Update Select the interval during which the group key will be valid. RADIUS Port: Enter the port used on the RADIUS server (1812 is default). RADIUS Secret: Enter the RADIUS secret. DWL-100AP User Manual WPA-PSK/WPA-PSK/WPA-Auto-EAP Cipher Type: Select Auto, TKIP, or AES from the pulldown menu. [. . . ] The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. · · · D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link's reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. [. . . ]