User manual D-LINK DFE-690TXD QUICK INSTALL GUIDE

[. . . ] This product can be used with: Windows XP, 2000, Me, 98se & 98 Macintosh OS v 8 & 9 DFE-690TXD 32-bit Cardbus Fast Ethernet Adapter Before You Begin You must have at least the following: · Windows XP/2000/Me/98se/98 or Macintosh OS v 8/9 with Carbus Support · One Available Cardbus Slot · CD-ROM Drive Check Your Package Contents These are the items included with your purchase: · DFE-690TXD 32-Bit Cardbus Fast Ethernet Adapter · CD-ROM (containing Drivers, PDF Installation Guide, PDF Manual and Warranty) If any of the above items are missing, please contact your reseller. For Windows XP/2000/Me/98: Run the Install CD BEFORE installing the DFE-690TXD into your laptop. [. . . ] If you have not done this and you have inserted the DFE-690TXD into the Cardbus slot, you will need to cancel the New Hardware Wizard (for Windows users), and start over at the beginning of this installation guide (for Windows or Macintosh). Make sure that your computer is turned Off. Insert the DFE-690TXD into the Cardbus slot of your laptop · Connect an Ethernet Cable (CAT5) from a switch or hub to the DFE-690TXD. Turn your computer On. Windows Users Proceed to Setion 4: Finishing the Windows Installation. Macintosh Users Restart your computer. Your installation is now complete. Proceed to Appendix 2 to configure your adapter to automatically receive an IP address from your DHCP server. Finishing the Windows Installation To complete the installation of the DFE-690TXD: · Make sure that the DFE-690TXD CD-ROM is inserted in the CD-ROM drive · The DFE-690TXD is inserted into your laptop · The laptop is turned ON · See the section below that corresponds to your Operating System to complete the installation: Windows XP Windows XP completes the installation of the DFE-690TXD automatically. A "Found New Hardware" message will appear in the task bar to indicate that the installation is complete. Windows 2000 Windows 2000 completes the installation of the DFE-690TXD automatically. When the "hour glass" disappears, the installation is complete. Windows Me & 98se/98 · · · Windows Me & 98/98se installs the drivers automatically. If a "Version Conflict" screen appears, select "Yes" to use the newer file and continue. Select "Yes" to restart your computer and complete the installation. Click Yes Technical Support You can find the most recent software and user documentation on the D-Link website. [. . . ] D-Link Technical Support over the Telephone: (877) 45D-LINK (877) 453-5465 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support. dlink. com email: support@dlink. com [. . . ]