User manual D-LINK DFE-670TXD INSTALLATION GUIDE

[. . . ] M-DFE-670TXD-NEW. QXD 3/15/2001 11:01 AM Page 1 Quick Install Guide for Windows Me DFE-670 TXD 10/100 Ethernet PC Card Please note that you will need Cat5, RJ-45 cable to complete your network installation. [. . . ] Click Finish, to complete installation. At this window, please select Yes to restart the computer. M-DFE-670TXD-NEW. QXD 3/15/2001 11:01 AM Page 3 3 Connecting to your network After the Hardware Wizard has completed the installation of the DFE-670TXD, you can make your network connection. Please insert one end of the RJ-45 plug into the opening in the DFE-670TXD Ethernet PC Card, and then insert the other end of the RJ-45 cable into your networking hub or switch. You are now networked! Please see Appendix A to check for proper installation of your DFE-670TXD using the Device Manager. Please see Appendix B for more information on types and lengths of cable that can be used to connect your network. Note: For more information on alternate networking possibilities, please see the Networking Basics and the Getting Started sections of the User's Manual. M-DFE-670TXD-NEW. QXD 3/15/2001 11:01 AM Page 4 . APPENDIX A To check for the proper installation of your DFE-670TXD, please go to START > SETTINGS > CONTROL PANEL> Double click on the SYSTEM icon. At the SYSTEM PROPERTIES window, click on the HARDWARE tab, and then click on the DEVICE MANAGER tab. Your DFE-670TXD will appear under NETWORK ADAPTERS, as shown. APPENDIX B Connecting Your Network Cable Category 5 UTP cable can be used for both Fast Ethernet cabling and for traditional Ethernet cabling. Connecting for Fast Ethernet cabling Cat5 cable is required for Fast Ethernet operation. [. . . ] The cable must be straight (not a crossover cable) with an RJ-45 plug at each end. [. . . ]