User manual D-LINK DES-5600

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual D-LINK DES-5600. We hope that this D-LINK DES-5600 user guide will be useful to you.


D-LINK DES-5600 : Download the complete user guide (3034 Ko)

Manual abstract: user guide D-LINK DES-5600

Detailed instructions for use are in the User's Guide.

[. . . ] DES-5600 Gigabit/Fast Ethernet Switching System User's Guide Rev. A1 (January, 2000) 651ES5600K15 Printed In Taiwan RECYCLABLE i Copyright © 1999 by D-Link Systems, Inc. All rights reserved. Limited Warranty Hardware: D-Link warrants each of its hardware products to be free from defects in workmanship and materials under normal use and service for a period commencing on the date of purchase from D-Link or its Authorized Reseller and extending for the length of time stipulated by the Authorized Reseller or D-Link Branch Office nearest to the place of purchase. This Warranty applies on the condition that the product Registration Card is filled out and returned to a D-Link office within ninety (90) days of purchase. [. . . ] You must know the MIB OID's and retrieve them individually. Figure 26: SNMP Management Configuration Menu Managing the DES-5600 52 Fast Ethernet Switching System User's Guide SNMP Manager Configuration Shown in Figure 27, this panel enables you to configure the DES-5600 for SNMP Management. You must configure these settings to manage the DES-5600 through SNMP. Figure 27: SNMP Manager Configuration SNMP Community String The SNMP Community String field enables you to name the SNMP Communities. For security you should change these names to help prevent unauthorized access to the DES-5600. Access Right Enables you to set the access rights that members of the SNMP Communities have. Read Only access rights mean that members of the community can view the information on the DES-5600 but they cannot make changes to the configurations. Read/ Write access rights enable the members of the community to make any changes they desire. Follow these steps to configure the DES-5600 for SNMP Management: 53 Managing the DES-5600 Fast Ethernet Switching System User's Guide 1. Reboot the DES-5600 to make the changes effective. SNMP Trap Manager Configuration Displayed in Figure 28, the panel enables you to configure the SNMP Trap Manager settings. Figure 28: SNMP Trap Manager Configuration IP Address Enables you to enter the IP address of trap managers. SNMP Community String Enter the Community String of the Trap Managers in this field. Traps are messages the DES-5600 sends out to inform trap managers of events on the network. Trap managers are special network users who are given certain rights and access to oversee and maintain the network. This feature is available only in D-View or by using other SNMP management software. You can specify which network managers may receive traps from the DES-5600 by creating a list of IP Addresses of the authorized network managers. Trap managers can receive the following trap types: · Cold Start Managing the DES-5600 54 Fast Ethernet Switching System User's Guide · · Cold Start Authentication Failure Link Change Event Signifies that the DES-5600 has been powered up. Authentication Failure Signifies that an addressee (or manager/ user) on the DES-5600 is not a valid user of the DES-5600 and may have entered an incorrect community name. Link Change Event Signifies that the link of a port has changed from link up to link down or vice versa. Enter the new value in the field or toggle the space bar to change the value. Reboot the DES-5600 for changes to take effect. Managing the DES-5600 55 Fast Ethernet Switching System User's Guide Switch Configuration The Switch Configuration panel, shown in Figure 29, enables you to decide how long the DES-5600 waits for a response before an address time out. Figure 29: Switch Configuration Address Aging Control Enables or disables address aging. Address aging refers to how long the MAC Address of devices remains in the Media Access Control Table (MAC Table) of the DES-5600. This can create problems on the network if a device is moved or removed from the network. It is best to allow addresses to age out so that information in the MAC is always refreshing itself and remains accurate. Login TimeOut Enables you to determine how long the DES-5600 waits before connections time out. [. . . ] 40 Tx64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Tx65 to 127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 TxFCS Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 U Unicast Frames In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE D-LINK DES-5600




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual D-LINK DES-5600 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.