User manual D-LINK DCS-6111

[. . . ] Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: RTP video port and RTP audio port must be an "even" number. The numbers of RTCP video port and RTCP audio port must equal to the numbers of RTP video port and RTP audio port, plus one repetitively. video: Multicast group You may choose to enable multicast for your camera audio and video streaming so that your cameras (sources) and the address: receivers (clients) can establish the connection to send and receive contents. Sources use this group address as the destination address while sending their data packets. Receivers use this group address to inform the network that they are interested in receiving packets sent to that group. D-Link DCS-6111 User Manual 46 Section 3 - Configuration For example, if some content is associated with group 239. 1. 1. 1, the source will send data packets destined to 239. 1. 1. 1. Receivers for that content will inform the network that they are interested in receiving data packets sent to the group 239. 1. 1. 1. The Multicast address ranges from 224. 0. 0. 0 to 239. 255. 255. 255, or, equivalently, 224. 0. 0. 0/4 Multicast video Default port number is 5560, or please choose between 1024 and 65534. port: Multicast RTCP Default port number is 5561, or please choose between 1024 and 65534. video port: Multicast RTCP Default port number is 5563, or please choose between 1024 and 65534. audio port: Multicast TTL Set a Time to Live(TTL) value for multicast packet, please choose between 1 and 255. It can also be assigned to another port number between 1025 and 65535. audio port: This Network Camera supports two way audio communication so that operators can transmit and receive audio simultaneously. By using the external microphone and an external speaker, users can communicate with people present around the Network Camera. In order to utilize this audio feature, make sure the video mode is set to MPEG-4 (refer to page 51) and the media option is set to Video and Audio (refer to page 32). Unicast video transmission delivers a stream through point-to-point transmission. On the other hand, multicast video transmission sends a stream to the multicast group address and allows multiple clients to acquire the stream by requesting a copy from the Multicast group address. The multicast RTP port must be an even number and the multicast RTCP port is equal to multicast RTP port number plus one; thus will always be an odd number. When the multicast RTP port changes, the multicast RTCP port needs to be changed accordingly. D-Link DCS-6111 User Manual 47 Section 3 - Configuration DynamicDNS DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The username and password are required when using the DDNS service. Enable DDNS: Click to enable the DDNS function. Server Name: Select your Dynamic DNS provider from the drop down menu. Username: Enter your username or e-mail used to connect to the DDNS server. Status: Indicates the current connection status. D-Link DCS-6111 User Manual 48 Section 3 - Configuration ImageSetup You may configure the image settings of the video for your network camera. Click Save Settings to save and activate your changes. Color: Select either a Color or B/W (black and white, monochrome) video display. [. . . ] The configuration on the WDR D&N Fixed Dome Network Camera image display is incorrect. Through the Setup > Image Setup section of the Web management you need to adjust the image related parameters such as brightness, white balance and power line frequency for fluorescent light. D-Link DCS-6111 User Manual 79 Appendix A - Networking Basics Networking Basics CheckyourIPaddress After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i. e. (Windows Vista® users type cmd in the Start Search box. ) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. [. . . ]