User manual D-LINK DCS-3110

[. . . ] Table of Contents Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the multicast RTP port changes, the multicast RTCP port will change accordingly. D-Link DCS-3110 User Manual Section - Configuration Dynamic DNS DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. The username and password are required when using the DDNS service. Enable DDNS: Click to enable the DDNS function. Server Name: Select your Dynamic DNS provider from the drop down menu. Username: Enter your username or e-mail used to connect to the DDNS Password: Enter your password used to connect to the DDNS server. Status: Displays the current connection status. D-Link DCS-3110 User Manual Section - Configuration Image Setup You may configure the color, brightness, and orientation settings of the video image. Click Save Settings to save your changes. Color: Select either for Color or B/W (black and white, monochrome) video display. frequency: Video Flip will vertically rotate the video while Mirror will orientation: horizontally rotate the video. You may check both options if the camera is being installed upside down. time stamp on video: D-Link DCS-3110 User Manual Section - Configuration Audio and Video Settings for two video streams (stream 1 and stream 2) can be configured here. You may configure one setting for computer display and the other one for mobile display. Mode: Select either JPEG or MPEG4. It is recommended using 176x144 for mobile viewing and 640x480 for computer viewing. Maximum 1 is the minimum value while 30 is the maximum frame rate: value. It is recommended choosing 30 for computer viewing and 5 for mobile viewing. Video quality: This limits the maximum refresh frame rate, which can be combined with the "Fixed quality" to optimize the bandwidth utilization and video quality. If the User wants to fix the bandwidth utilization regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth. Internal Select an internal microphone input gain from the microphone drop-down list. input gain: It is necessary to find the optimum gain that transmits the best audio for listening. Note: "dB" stands for decibels, a logarithmic unit of measurement in acoustics . The higher the decibel number, the louder the sound. D-Link DCS-3110 User Manual Section - Configuration External Select the external microphone input gain from the list. microphone input: Audio type: AAC (Advanced Audio Coding): A wide band audio coding algorithm that exploits two primary coding strategies to dramatically reduce the amount of data needed to convey high-quality digital audio. GSM-AMR: A standard adapted audio codec by the 3GPP video (3rd Generation Partnership Project). Higher bit rate means higher audio quality but it takes more network bandwidth to transmit. [. . . ] This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0. 0. 0. 0, check your adapter installation, security settings, and the settings on your access point. Some firewall software programs may block a DHCP request on newly installed adapters. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-3110 User Manual 3 Appendix A - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista® Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. [. . . ]