User manual D-LINK DAP-2310

[. . . ] 76 D-Link DAP-2310 User Manual 3 Section 1 - Product Overview Product Overview Package Contents • D-Link DAP-2310 AirPremier® N Access Point • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual • Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2310 will cause damage and void the warranty for this product. System Requirements • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • For configuration, the following web browsers are supported: • Microsoft® Internet Explorer® 6. 11n AP increases productivity by allowing you to work faster and more efficiently. With the DAP2310, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly. [. . . ] Enabling this feature will improve the user experience for audio and video applicaMultimedia): tions over a Wi-Fi network. Ack Time Out To effectively optimize throughput over long distance links, enter a value for Acknowledgement Time Out from 64 to 200 (2. However, be aware that it can also increase the error rate in some installations due to increased sensitivity to radio-frequency installations. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host based on IGMP messages passing through the AP. This determines whether to limit the number of users accessing this device. This feature allows the user to share the wireless network traffic and the client using multiple APs. If this function is enabled, when the number of users exceeds this value, the DAP-2310 will not allow clients to associate with the AP. User Limit (0-64): Set the maximum amount of users that are allowed access (0-64 users). The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. enable Multi-SSID: Band: Index: Check to enable support for multiple SSIDs. Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802. For a detailed description of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters, please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. SSID: SSID Visibility: Security: D-Link DAP-2310 User Manual 32 Section 3 - Configuration Priority: WMM (Wi-Fi Multimedia): Encryption: Key Type: Key Size: Key Index (1-4): Key: WPA Mode: Check the Enable Priority box at the top of this window to enable. If Enable is selected, the Key Type, Key Size, Key Index (1~4), Key, and Confirm Keys must also be configured. When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. When you select WPA-Personal, please enter a PassPhrase in the corresponding field. [. . . ] From the Security tab, click the button to restore the settings to their defaults. €¢ Click the Connection tab and set the dial-up option to Never Dial a Connection. €¢ Go to the Advanced tab and click the button to restore these settings to their defaults. Open your web browser and enter the IP address of your D-Link access point in the address bar. [. . . ]