User manual D-LINK D-VIEWCAM BROCHURE

[. . . ] D-Link D-ViewCam Central Management Software for SecuriCam Manual Version 1. 00 Building Networks for People Contents A. D-ViewCam Installation 1. Minimum Requirement for Multiple Camera Configurations 3. D-ViewCam System Structures 3 B. Running the Installation Wizard 1. 4. 7. 11 11 11 12 12 13 13 14 14 15 16 16 Running the System Admin Program (Method 1) Running the System Admin Program (Method 2) System Admin Interface System Management Overview Email Setting Holiday Setting DNS Setting General Setting System Alarm Rotation for Camera Split screen Motion Rectangle (For DCS-900 and DCS-900W only) 5. User Group/User 17 17 18 18 5. 1. Adding New Users 6. eMap Icon overview Button overview Adding Area Removing All Areas/Removing Area Uploading an eMap (Setting an Area Background) Tools in Manu Bar of eMap interface 19 20 20 21 21 22 22 6. 1. [. . . ] If no further action to add, click Cancel to dismiss this window. 31 Alarm Action List Table Select Live Video Recording Email Preset DO ON DO OFF To Trigger the live video of breached camera, live video will pop up in Monitor's 4-split screen. Trigger the alarm recording of breached camera; alarm recording time is set by number of seconds. Trigger the email and take snapshot of breached device, one Email receiver at an action. Select " Alarm Video" Action" b y "Live Step2. Select "Breach Device", and enter "Remark" The live video display method of alarm action include the following: (1) If only one alarm is triggered, the different device breached by "live video" alarm action will be displayed on the 4 split screen of Monitor Program and is arranged starting from upper-left to upper-right, lower-left, and lower-right. (2) If live video is breached by different alarm source, live video is display accordingly. If the number of live video is greater than 4, they will be displayed rotationally. Step3. Dismiss the live video in 4-split screen Click Cancel Alarm button in Monitor program. 8. 9. 4. Select " Alarm Action" b y "Recording" Step2. Step3. Select "Breach Device", and enter "Remark" NoteFor the difference of Alarm Recording and Schedule Recording, refer to FAQ. Select "Breach Device", and enter "Remark" Select camera form "Breach Device" field and enter a brief description in "Remark" field to describe this alarm. Email will attached with two snapshot image files if you select camera other than "text only" Step3. Enter Email Address 8. 9. 6. Select Alarm Action b y "Preset" Select Preset Point edited in C8. 5 from "Preset" field, please refer to C8. 9. 2. for the remaining steps. When alarm is detected, the system will turn PT camera to the specified preset point. Step2. Select Alarm Action b y "DO ON" /"DO OFF" Select "DO ON" /"DO OFF" from "Alarm action" field, please refer to C8. 9. 2. When alarm is detected, the system will turn off/on DO accordingly. 8. 9. 7. Examples 1. Set alarm triggered by Cam01-image and records the video of Cam01-image: Select Cam01-image icon in System setup Area and click Image Alarm button from Menu bar, then select "Alarm action" by Recording and "Breach Device" by "Cam01-image". Set alarm triggered by Cam01-sensor and records the video of Cam02-image: Select Cam01-sensor icon in System setup Area and click Sensor Alarm button from Menu bar, then select "Alarm action" by Recording and "Breach Device" by "Cam02-image". Set alarm triggered by Cam01-sensor and send snapshot of the video of Cam02-image: Select Cam01-sensor icon in System setup Area and click Sensor Alarm button from Menu bar, then select "Alarm action" by Email, "Breach Device" by "Cam02-image". 33 8. 10. Placing Device to eMap Step1. Placing Device to eMap Drag-and-drop the device icon from System Setup area to its location on the eMap interface. All devices under camera (include image, relay, and sensor) can be placed on the eMap interface. Step2. Rotate the Image icon on " eMap interface" Right click the Image icon in eMap interface, you will find 8 directions to select to indicate what direction that camera is facing. NoteAll devices could be detected by (1) click Remove button in the Menu Bar (2) right click icon in the eMap interface to find "Delete" function. 8. 11. Save Camera Configuration This function is to give user more flexibility to arrange their camera, the configuration of image, and sensor and relay under camera could be saved to a configuration file. It allows saving one camera at a time, the information saved include: configurations in Camera Setting, Schedule Recording and eMap location. 8. 11. 1. Select Camera Select Camera icon and click Save Camera button from the Menu Bar. Browsing the "file path" for saving this camera configuration and set a file name for it. 34 8. 11. 2. Load Camera Step1. Open Load Camera Select Area icon and click Load Camera button from the Menu Bar. Step2. Browse the file path of camera configuration and click OK to load it. Note The IP, Port NO, Location of loaded camera should be unique. It is advised to add new camera other than Load Device if it's IP, Port NO or Location is currently in use. 8. 12. Backup Recorded Files Backup recorded files button is designed to archive the schedule recorded file to other HD and release the storage for the coming video. Select Image icon from and click Backup Recorded Files from the Manu Bar. [. . . ] How do I get alarm notifications? D-Link D-ViewCam sends alarm messages in different ways, based on the alarm-triggered action that is set for a camera. For example, if the alarm-triggered action is Email, the message will be sent by Email. For details, please refer to User's Manual section C 8. 9. 5. 20. How do I turn off an alarm? Click the ON button to change its display to OFF. [. . . ]