User manual CURTIS MATHES CMC13005

[. . . ] TV/VCR Combination Unit Owner's Manual CMC13005 IMPORTANT SAFETY INSTRUCTIONS Warning!Important Safety Instructions Save These Instructions Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. [. . . ] 2 Press CLEAR to reset the timer to "00:00:00. " 2 When the tape begins to play, the TV/VCR begins automatic tracking. The tracking display will appear the first time a tape is played after being inserted into the TV/VCR, when there is a change in tape speed, or when you press TRK +, -. If automatic tracking doesn't remove the streaks from the picture, press and hold TRK+ or TRK­ until the streaks disappear. 2 The time counter appears. Blank tapes or blank sections of tapes do not affect the counter display. Press CLEAR to set the counter to "00:00:00. " 24 CHAPTER FOUR: VCR OPERATION VCR OPERATION Playing a Video Tape, continued To return to the scene you marked: 1 Press STOP. The TV/VCR stops the tape when the counter reaches "00:00:00. " 3 Press PLAY to view the scene you marked again. Recording TV Programs as You Watch Using P. PLUS Press P. PLUS to compensate for a poor rental tape. Recording 3 1 With your TV/VCR turned on, and with a tape in the unit, press SPEED. Be sure the record safety tab is in place. For information on the record safety tab, see page 38. Picture Plus : On 4 SP 1 2 Insert a tape and press PLAY. The Rental Picture Plus functions only when a tape is being played. If the tape is ejected and reinserted, the Rental Plus feature will be OFF. Select the television channel you want by pressing CHv or CHw or by using the number buttons. If you are using the number buttons to select the channel, press 0 before a single-digit channel number (for channel 5, press 0, 5). The record indicator on the control panel illuminates and the TV/VCR begins recording. The TV/VCR automatically stops recording when it reaches the end of the tape. Don't change tape speeds while recording; this may cause picture distortion during playback. 2 The tape speed appears in the lower left corner of the screen. Press SPEED repeatedly until the speed you want (SLP, SP) appears. SP (Standard Play) is the most common speed for recording. For more information on tape speeds, see page 38. When you finish recording, rewind the tape and remove it from the TV/VCR. CHAPTER FOUR: VCR OPERATION 25 VCR OPERATION Recording TV Programs as You Watch, continued Editing While Recording You can edit while recording, selecting only those scenes you want to record from the current television program. This is especially helpful if you want to record a program without commercials. 1 Be sure you have begun recording and that the record indicator light on the front panel is lit. After ten minutes in pause mode, the TV/VCR stops the tape automatically and switches to TV mode to protect the video heads. 3 To resume recording, press P. /STILL again. Using Advanced Recording Features One-touch Recording One-touch Recording (OTR) lets you record television programs with the touch of a button. You can program the length of time (up to four hours) that you want to record. 1 Insert a video cassette tape, set the tape speed, and select the channel you want to record. The TV/VCR won't record if the record safety tab on the tape has been removed. For more information, see page 38. 3 2 Press REC on the remote control twice. Record 30M Press REC on the remote control repeatedly until the time you want appears. You can increase the length of time you want to record at any time during the recording process by pressing the REC button again and choosing additional time. If you want to stop recording before the time is up, press the REC button until the OTR display shows "Stop. " The recording stops after a few seconds. [. . . ] with T-120 Heads Video: Two rotary heads Audio/control: One stationary head Erase: One full track erase, one audio track erase Video Input VIDEO IN jack (RCA) 1. 0 V p-p, 75-ohm unbalanced Audio Input AUDIO IN jack (RCA) -8 dBm, 50K-ohm unbalanced TV tuners VHF input: ch. 13, cable channels "4A, A~W, W+1~W+84, A-5~A-1" 75-ohm unbalanced UHF input: ch. 69 VHF, UHF one input 75-ohm unbalanced Operating temperature 41° F ­ 104° F (5° C ­ 40° C) Operating humidity 10% ­ 75% Equipment specifications are subject to change without notice Model Power requirements Power consumption CMC13005 120V AC, 60Hz Approx. 5watts when off Dimensions(w x d x h) 368 x 393 x 381 mm 14. 48 x 15. 47 x 15. 00 inches Weight 11. 7kg ; 25. 79lbs APPENDIX 39 Curtis Mathes Color Television LIMITED WARRANTY TO ORIGINAL PURCHASER This Curtis Mathes brand product, as supplied and distributed by Curtis Mathes and delivered new, in the original carton to the original consumer purchaser, is warranted by Curtis Mathes against manufacturing defects in materials and workmanship for a limited warranty period of: Ninety (90) Days Labor and One (1) Year Parts and Two (2) Years Warranty for Picture Tube (CRT) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. [. . . ]