User manual CUISINART DCC-1150

[. . . ] INSTRUCTION BOOKLET Cuisinart® Classic Thermal 10-Cup Programmable Coffeemaker DCC-1150 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. To protect against electric shock, do not place cord, plug, or base in water or other liquids. Close supervision is necessary when any appliance is used by or near children. Allow to cool before putting on or taking off parts and before cleaning the appliance. [. . . ] Audible Tone (not shown) The Cuisinart® Thermal 10-Cup Programmable Coffeemaker is equipped with an audible tone which will sound 5 times when the coffee has completed brewing (coffee will continue to stream from the filter for a few seconds after tone). On/Off Button Used to turn your coffeemaker on and off; also works in tandem with the function knob. Hour and Minute Buttons For use in setting hour and minute for time of day, and auto on time. Clean Setting Used to indicate time to clean your coffeemaker to remove calcium buildup. 1-4 Cup Setting For brewing smaller pots of coffee ­ it provides double heating of the water, so coffee is piping hot. 6 PROGRAMMING YOUR COFFEEMAKER TO BREW COFFEE 1. Note: This coffeemaker shuts off automatically after brewing is complete. PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME To set the time: 1. Set Hour: Press and hold the Hour button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off. NOTE: When the number count passes 12, the PM light will be displayed on the LCD. Remove the water filter holder from the coffeemaker by lifting it out of the reservoir area with your thumb and forefinger. Hold the water filter holder lengthwise and place thumbs in slots directly under arrows. Place the filter in the holder recess area at the bottom of the water filter holder. 7 NOTE: Caution must be used when inserting the charcoal water filter. Improper placement in the holder can cause tearing of the filter skin. Close the water filter holder; you will hear a snap indicating it is in place. You should place the hole openings in the side of the unit directly under the water stream. Replace the water filter holder in the reservoir area of the coffeemaker, pushing it all the way down to the base of the unit. NOTE: We recommend changing the water filter every 60 days or 60 uses ­ more often if you have hard water. Replacement water filters can be purchased in stores, by calling customer service at 1-800-726-0190, or through the Cuisinart website, www. cuisinart. com. Pour the desired amount of water in the reservoir using the step water level indicator located at the rear of the reservoir. Add the ground coffee Remove the filter basket by grasping the handle and lifting straight up, and then place it on the countertop. [. . . ] If the Clean light no longer flashes, turn the coffeemaker off and then run one cycle of fresh cold water through the unit before using the unit again to brew coffee. Notes on the Clean Function Pressing the Clean button cancels all other settings. If it is pressed accidentally, press it again to return the coffeemaker to all its previous settings. Pressing On/Off will also exit the Clean Mode and turn the coffeemaker off. 9 WARRANTY LIMITED THREE-YEAR WARRANTY This warranty supersedes all previous warranties on the Cuisinart® Classic Thermal 10-Cup Programmable Coffeemaker. [. . . ]