User manual CUISINART CSB-44N

[. . . ] INSTRUCTION AND RECIPE BOOKLET CORDLESS RECHARGEABLE HAND BLENDER For your safety and continued enjoyment of this product, always read the instruction book carefully before using. CSB-44N TABLE OF CONTENTS: Important Safeguards . To avoid possibility of personal injury, always detach the charger handle from the motor body before attaching or removing blades and/or attachments. Unplug charger handle from outlet when not in use, before putting on or taking off parts and before cleaning. Keep hands, hair, clothing, as well as spatulas and other utensils away from attachments and mixing container during operation to reduce risk of injury to persons, and/or damage to the appliance. [. . . ] Storage stand kit consists of six (6) pieces: two anchor bolts, two plastic wall anchors, and two storage pieces that can fit together for countertop, or be separated for wall mount. (See diagram below. ) This blade also chops and blends cooked fruits, vegetables and baby foods. To chop or mince, always cut food into uniform pieces of about 1/2" to ensure perfect results. Keep the Cuisinart® Cordless Rechargeable Hand Blender directly over the food being processed, while placing a free hand on the mixing container for support. You may wish to place your free hand over the top of the container to prevent chopped ingredients from escaping. NOTE: If a piece of food becomes lodged in the guard surrounding the blade, follow the safety instructions below: 1. Release the power button and detach the charger handle from the motor body. After the power source is disconnected, use a spatula to carefully remove the food lodged in the guard. After the lodged food has been removed, reattach the charger handle to the motor body and continue processing. Align the two pieces back to back on a flat surface, with the ring-shaped reservoirs facing right and left. Lift up the right piece; align the two tabs in the back 8 with the two slots of the left piece. Gently slide the tabs into the slots until both pieces are resting flat on the countertop. To store the hand blender, detach the shaft and place the bottom part (blade guard) into one of the reservoirs. You should be able to read the Cuisinart® logo when the motor body is in the stand. The charger handle can be attached to the motor body when you store the unit. This is especially helpful when you want the hand blender close at hand during a heavy use period. Probably you will want to plug the charger handle into the electrical socket to keep the battery charged during other times. The counter storage unit can also be placed in a cupboard or on a shelf. Mark the wall with a pencil in the locations indicated for screw holes by the template. Push completely into the hole with fingers, or tap in gently with a hammer. Screw a mounting screw into each hole, leaving 1/8" to 1/4" of the head and screw exposed. Position the two mounting holes of the wall bracket over the screw heads, and slide wall bracket down the wall until the bracket is resting against the screw head, and will not slide any further. If the wall bracket feels too loose against the wall, remove bracket, put screws further into wall, and replace bracket. [. . . ] Bring to a boil, then reduce heat and simmer, partially covered, for 20 minutes. Insert the hand blender fitted with the metal blending blade into the saucepan. Turn the hand blender ON, and Variations: Cinnamon Applesauce: add a cinnamon stick when cooking the apples. Cranberry Applesauce: Substitute cranberry or cranapple juice for the water and add 1/3 to 1/2 cup dried cranberries to the apples before cooking. 14 SWEETENED WHIPPED CREAM Whip cream to top desserts in just seconds. [. . . ]