User manual CUISINART CJK-17BC

[. . . ] To disconnect, push switch to "OFF", then remove plug from wall outlet. Scalding may occur if the lid is removed during the brewing cycle. FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS SPECIAL CORD SET INSTRUCTIONS: A short power-supply cord is provided to reduce the risks of becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised. If a long extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. [. . . ] 18/10 Stainless Steel Construction with 1- 3/4 Quart (1. 7L) Capacity 2. Power "On" Switch "MAX" located near handle indicates the maximum amount of cold water to be added. 3. Stay-Cool Handle Simply lift switch (gently lifting up until "click" is heard) to begin the boiling process. Kettle shuts off automatically once water has boiled, or when kettle is lifted from power base. 7. Cord Wrap (under base) For quick and easy filling. Unwind only as much as you need. 7. 3 OPERATING INSTRUCTIONS BEFORE USING FOR THE FIRST TIME Before using your Cuisinart® Cordless Electric Jug Kettle for the first time, we recommend operating the kettle 2 or 3 times, following the instructions below. This will remove any dust or residue remaining from the manufacturing process. 5. Power "ON". Activate the power "ON" switch by gently lifting up until a "click" is heard (See Fig. 3. ) When the water has boiled, the kettle will automatically switch "OFF". NOTE: The kettle can be switched off at any time before the water boils, simply by lifting the kettle off the base. 6. If you wish to reboil the water, you must lift the power "ON" button again. BOILING WATER 1. Open the Lid. HELPFUL HINTS Always use fresh, cold water for each boiling. If the kettle is accidentally switched "ON" without a sufficient water level, a boil-dry mechanism will automatically switch the kettle "OFF". NOTE: For your safety, it is recommended that the lid be closed on the kettle whenever kettle is in use. Push the release button on the handle and the lid opens. Fill the Kettle. Fill the kettle with as much fresh, cold water as you will need. The maximum water level is indicated near the handle and is marked by the word "MAX". Place Kettle on Power Base Place the kettle on the power base so the element on the bottom of the kettle sits securely on the power base. 1. 7L max 1. 7L max 1. 5L 1. 5L 1. 3L 1. 3L Figure 1 Figure 2 Figure 3 4 CLEANING AND MAINTENANCE CAUTION: Always disconnect the kettle from electrical outlet before cleaning. Clean the exterior surface of the kettle with a clean, damp cloth to preserve its original highly polished finish. Do not use abrasive cleansers or scouring agents of any kind on the interior or exterior of the kettle. Do not immerse the kettle or power base in water or other liquid, and be sure that the electric kettle socket is kept dry. workmanship under normal home use for 3 years from the date of original purchase. [. . . ] Frequency depends on the hardness of your tap water and how often you use the kettle. We suggest use of a kettle descaler in order to dissolve these chalky deposits or scale. If a commercial descaler is not available, fill the kettle with enough white vinegar to cover the bottom by about 1/2". You may need to repeat this several times with cooled vinegar to remove the calcium buildup completely. [. . . ]