User manual CUB CADET 2135

[. . . ] Intended use - This telephone has been designed for use on an analogue telephone line (PSTN) within Germany. However, no guarantee can be accepted for trouble-free operation on all telecommunications terminal equipment connections due to the differences between the different telecommunications network operators. The telephone requires a TAE socket with F/N coding in common with other plug-in units such as fax machines, answering machines or modems. Connect the telephone cable to the phone socket intended for the purpose only. [. . . ] If you have connected your telephone to a private exchange, you can use all the facilities such as call transfer, automatic recall, etc. You can find out from the dealer from whom the equipment was purchased whether your telephone will work on your private exchange without any problems. With some private exchanges, it is necessary to dial a certain number (e. "9" or "0") in order, after a short pause, to obtain a dialling tone for an outside line on the extension. Button pressed at the required point until When entering the number, hold the the d indicator appears in the display. You can, of course, also store this pause with numbers in the phone book. Programming is started by means of the You can scroll through the menu using the selection buttons Press the Press the button to move to the next menu level. In the following descriptions, each programming procedure is described in full so that you can program any feature without knowledge of the menu structure. Experienced users can move freely within the menu with the help of the menu tree. Button Display FEATURES DISPLAY LANGUAGE 1x LABEL DECT4800 Delete existing letters with and enter new name. If you have logged on several handsets to one base station, it can be useful to give each handset its own name. You can determine whether the duration of the call is displayed or not. Some functions of the telephone system are protected against unauthorised use by a PIN code. The contents of the phone book, the redial facility and the caller list can be deleted with one procedure. You can reset the handset to the factory settings once more by means of the Factory Settings function. Enter the PIN code for the base station SETTINGS The factory settings are reset. External ring melody tone 1 Internal ring melody tone 2 Basis ring melody 1 Handset ringer volume 3 Base station ringer volume 3 Direct dialling off PIN 0 0 0 0 Call accept 5 rings Record calls Message tone off Receiver volume medium Flash time 1 Confirmation tone on Tone dialling Language: German Baby call off Answering machine on Standard greeting on Recording time 2 min. SOS Code 111 Button click on Automatic call accept on Call duration on Charging monitor on Monitor off Dialling blocks off Listen-in on Exception numbers off Blocks off PIN remote access 000 The integral answering machine can digitally store up to 25 incoming messages with a total length of up to 9 minutes. For your greeting message, you can use two pre-recorded standard messages or you can record two messages of your own. If you have not recorded your own greeting, the standard greeting will answer automatically. Note: Even when the answering machine has already accepted the call, you can also accept the call by means of the call button . Play back messages Stop button Repeat messages Play back memo Record memo Delete messages When the answering machine control is switched on, the display will change back to the normal display after ca. [. . . ] Depending upon how you want to use the system, you can allocate the same phone number to each base station or you can give the base stations different numbers. Please check the range of the handsets each time before setting up a new base station. If a handset is logged on to the base station and if automatic base station selection is switched on (further information in this chapter), the handset will always be forwarded to the nearest base station automatically. When selecting and then select the required base FIXED, confirm with station by means of the number pad. [. . . ]