User manual CRESTRON TPS-IMC-BV

[. . . ] 7 Problem Solving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Further Inquiries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Future Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Consult the latest revision of the TPS-VID Operations & Installation Guide (Doc. 5869) for details. · NET/VIDEO Pinouts PIN # 1 2 3 4 5 6 7 8 9 10 · DESIGNATION +24V GND C+ CY Z Y+ YGND +24V DESCRIPTION Power (Network) Ground (Network) Chrominance (Positive) Chrominance (Negative) Data (Network) Data (Network) Luminance (Positive)/Composite Luminance (Negative)/Composite Ground (Network) Power (Network) RGB ­ This 10-pin RJ45 port connects to the panel and is made active with the purchase and installation of the TPS-XVGA-BV, RGB Computer Interface Card. Consult the latest revision of the TPS-XVGA-BV Operations & Installation Guide (Doc. Description of the pinouts is shown in the table after this paragraph. Operations Guide - DOC. 5921 Interface Module: TPS-IMC-BV · 3 Interface Module RGB to the Panel Pinouts (RJ45 Port) PIN # 1 2 3 4 5 6 7 8 9 10 Crestron TPS-IMC-BV DESIGNATION VHRR+ GG+ BB+ H+ V+ DESCRIPTION Vertical Sync (Negative) Horizontal or Composite (Negative) Red Video (Negative) Red Video (Positive) Green Video (Negative) Green Video (Positive) Blue Video (Negative) Blue Video (Positive) Horizontal or Composite (Positive) Vertical Sync (Positive) · AUDIO ­ This 8-position RJ45 mates with the TPS-5000 or TPS-6000 touchpanel. This port provides audio input to the touchpanel and mic out from the touchpanel to audio amplifiers. Description of the pinouts is shown in the table after this paragraph. AUDIO Pinouts PIN # 1 2 3 4 5 6 7 8 DESCRIPTION Audio Shield Audio Left + Audio Left Audio Right + Audio Right Mic Out Shield Mic Out + Mic Out - · AUDIO INPUT ­ This port is designed for future use. Description of the pinouts is shown in the table after this paragraph. AUDIO INPUT Pinouts (RJ45 Port) PIN # 1 2 3 4 5 6 7 8 DESCRIPTION Mic + Mic Mic + Audio Left + Audio Left Mic Audio Right + Audio Right - · AUDIO INPUT ­ The port mates with a six-pin connector, supplied, and provides differential/single ended audio input and output. Description of the pinouts is shown in the table after this paragraph. 4 · Interface Module: TPS-IMC-BV Operations Guide - DOC. 5921 Crestron TPS-IMC-BV AUDIO INPUT Pinouts (6-Pin Port) PIN S R+ RL+ LS Interface Module DESCRIPTION Shield Right Positive Right Negative Left Positive Left Negative Shield · MIC OUT ­ The port mates with a three-pin connector, supplied, and produces line level differential output. Description of the pinouts is shown in the table after this paragraph. MICROPHONE Pinouts PIN M+ MS DESCRIPTION Positive Negative Shield BAL/COAX Video Switch A single two-position toggle switch is centrally located on the top panel of the TPS-IMC-BV. Use the switch to select between balanced video (BAL) and unbalanced video (COAX). Leading Specifications The table after this paragraph provides a summary of leading specifications for the TPS-IMC-BV. Leading Specifications for the TPS-IMC-BV SPECIFICATION Dimensions DETAILS Height: 3. 20 in (8. 13 cm) Width: 7. 70 in (19. 56 cm) Depth: 1. 25 in (3. 18 cm) Weight 1. 15 lb (0. 52 kg) As of the date of manufacture, the TPS-IMC-BV has been tested and found to comply with specifications for CE marking. Setup Network Wiring NOTE: When making wire connections, refer to the latest revision of the Cresnet Network Interconnect Drawing (Doc. The document can be obtained from the Downloads page (CABLES and MANUAL Libraries) of the Crestron website (www. Search for the CRESNET. PDF files. Interface Module: TPS-IMC-BV · 5 Operations Guide - DOC. 5921 Interface Module Crestron TPS-IMC-BV When calculating the wire gauge for a particular network run, the length of the run and the power factor of each network unit to be connected must be taken into consideration. If network units are to be daisy-chained on the run, the power factor of each network unit to be daisy-chained must be added together to determine the power factor of the entire chain. The length of the run in feet and the power factor of the run should be used in the following resistance equation to calculate the value on the right side of the equation. Resistance Equation R < 40, 000 L x PF Where: R = Resistance (refer to table below). PF = Power factor of entire run (or chain). The required wire gauge should be chosen such that the resistance value is less than the value calculated in the resistance equation. Wire Gauge Values RESISTANCE (R) 4 6 10 15 WIRE GAUGE 16 18 20 22 13 24 (Doubled-CAT 5) NOTE: All network wiring must consist of two twisted-pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pair is the Y conductor and the Z conductor. [. . . ] This warranty shall be the sole and exclusive remedy to the purchaser. In no event shall CRESTRON be liable for incidental or consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. CRESTRON makes no other warranties nor authorizes any other party to offer any warranty, expressed or implied, including warranties of merchantability for this product. This warranty statement supersedes all previous warranties. Trademark Information All brand names, product names, and trademarks are the sole property of their respective owners. [. . . ]