User manual CRESTRON TPS-G-TPI

[. . . ] Crestron Isys® TPS-G-TPI G-Series Touchpanel Interface Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc Crestron Isys® TPS-G-TPI G-Series Touchpanel Interface Contents Isys® G-Series Touchpanel Interface: TPS-G-TPI 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The following are recommended software version requirements for the PC: · (Optional but highly recommended) SystemBuilder version 2. 0 or later (Requires SIMPL Windows, VT Pro-e, Crestron Database and Crestron Engraver). Operations Guide ­ DOC. 6445 Isys® G-Series Touchpanel Interface: TPS-G-TPI ¥ 33 G-Series Touchpanel Interface · · · · Crestron Isys® TPS-G-TPI SIMPL Windows version 2. 06. 16 or later. Requires SIMPL+® Cross Compiler version 1. 1 and Device Library update 342. Used for communication, file transfer, and many other functions (replaces Viewport). Programming with Crestron System Builder Crestron System Builder offers automatic programming for such residential and commercial applications as audio distribution, home theater, video conferencing, and lighting. The interface of this tool guides you through a few basic steps for designating rooms and specifying the control system, interfaces, devices, and functionality. Crestron System Builder then programs the system, including all interface projects and control system logic. Crestron System Builder is fully integrated with the Crestron suite of software development tools, including SIMPL Windows, VT Pro-e, Crestron Database, User IR Database, and User Modules Directory. Crestron System Builder accesses these tools behind the scenes, enabling you to easily create robust systems. SystemBuilder For additional details, download SystemBuilder from the Crestron website and examine the extensive help file. Programming with SIMPL Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. NOTE: The following are acceptable file extensions for programs that include a TPS-G-TPI, developed for specific control system types: . smw projectname. smw (source file) . spz projectname. spz (compiled file for 2-Series) . usp projectname. usp (source code module for SIMPL+) . ir projectname. ir (user IR) . umc projectname. umc (user macro) . ush projectname. ush (completed SIMPL+) NOTE: In the following description, the PRO2 control system is used. ® 34 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI Operations Guide ­ DOC. 6445 Crestron Isys® TPS-G-TPI G-Series Touchpanel Interface SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a TPS-G-TPI interface. Join Number Remapping (JNR) is a programming concept that allows a TPS Series touchpanel or interface to use join numbers with values over 4000 (Join Numbers 4001 to 15999) by bringing them within the range of the TPS-G-TPI interface symbol, thereby increasing the device's functionality. JNR provides the capability of managing IP IDs in Ethernet applications where a device communicates with multiple control systems that have been uploaded with the same program. Refer to the latest version of the 2-Series Control System Reference Guide (Doc. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System View The System Views lower pane displays the PRO2 system tree. This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate the TPS-G-TPI interface into the system, drag it from the Touchpanels folder (Cresnet) of the Device Library and drop it on the C2Net-Device Slot. The PRO2 system tree displays the interface in Slot 9, with a default Net ID of 03, as shown in the following illustration. [. . . ] Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. 07647, or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]