User manual CRESTRON TPS-6000L

[. . . ] Crestron IsysTM TPS-6000L 15 Inch Lectern Touchpanel Contents 15 Inch Lectern Touchpanel: Crestron IsysTM TPS-6000L 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Leading Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select the Return button, located at the lower right corner of the Video Menu, after video parameters have been set. VisionToolsTM Pro-e (Multi-Mode Objects) Have a comment about Crestron's software?Direct software related suggestions and/or complaints to Crestron via email (software@crestron. com). Instead refer to "Further Inquiries" on page 27. VisionToolsTM Pro-e (VT Pro-e), a design and programming Windows-based software, permits the creation of control screen variations incorporating two and three-dimensional graphics and text. A set of pages, which make up a project, can be designed for each TPS-6000L touchpanel application. Each page contains objects such as custom control graphics, two and three-dimensional buttons, sliders, and digital readouts which allow the user to interface with the control system. The project is uploaded to the touchpanel and programmed into the flash PROM. The touchpanel uses the programmed project until another set is uploaded from the PC. VT Pro-e also allows users the option to generate projects destined for web browsers rather than for physical touchpanels. The single most-advanced VT Pro-e high-performance programming technique involving the TPS-6000L is the concept of multi-mode objects. A multi-mode object (i. e. , button, legend, etc. ) is an object drawn on a VT Pro-e page that can have one or more active and inactive visible settings (modes). Each multi-mode object has a minimum of one inactive analog join; buttons and legends have a digital join with an active and inactive analog join. There are actually 100 possible modes for each active and inactive analog join. In other Crestron touchpanels, these settings are limited to two visible settings. The second setting is the inactive object's face, frame and text color. For example, assume a user wanted a touchpanel page to display an object that changed color and associated graphic/text based on the state of an analog join number controlled by a Crestron control system. This example is analogous to a traffic light that changes colors as well as controlling the text on a walk/don't walk sign. Using single-state objects, the user would have to draw and manage five objects and three digital join numbers: one 3-D border, one animation object, and three transparent buttons with active and inactive text color. However, using a single multi-mode object, the programmer gets the same result with less effort. All that is needed is one multi-mode button having an inactive state with three modes. Furthermore, if the project needs to be edited, only one "Object Properties" window needs to be accessed. And when it is time to recompile and upload the file to the touchpanel, time is saved as well. VT Pro-e reworks only those parts of the project that have changed since the last compile and upload. [. . . ] Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. [. . . ]