User manual CRESTRON TPS-3100L

[. . . ] Crestron Isys® TPS-3100L 6. 4 Inch Lectern/Wall Mounted Touchpanel Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc. Crestron Isys® TPS-3100L 6. 4" Lectern/Wall Mounted Touchpanel Contents 6. 4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a TPS-3100L touchpanel. A Join Number Remapping (JNR) program can be written to augment the functionality of the touchpanel by making some of the touchpanel's internal functions available to the SIMPL Windows programmer. Refer to "Join Number Remapping" on page 26 for more information. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. 22 · 6. 4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L Operations Guide ­ DOC. 6291 Crestron Isys® TPS-3100L PRO2 System View 6. 4" Lectern/Wall Mounted Touchpanel The System Views lower pane displays the PRO2 system tree. This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate the TPS-3100L touchpanel into the system, drag the TPS-3100 from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in the System Views. The PRO2 system tree displays the touchpanel in slot 9 with a default Net ID of 03 as shown in the following illustration. NOTE: The first touchpanel in a system is preset with a Net ID of 03, when its symbol is dragged into the upper pane of System Views. Additional touchpanels are assigned different Net ID numbers as they are added. C2Net Device, Slot 9 Setting the Net ID in Device Settings Double-click the TPS-3100 icon to open the "Device Settings" window. If necessary, select the Net ID tab to change the Net ID, as shown in the following figure. Operations Guide ­ DOC. 6291 6. 4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L · 23 6. 4" Lectern/Wall Mounted Touchpanel "Device Settings" Window for the TPS-3100 Crestron Isys® TPS-3100L NOTE: SIMPL Windows automatically changes Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware settings details, refer to "Identity Code" on page 9. TPS-3100 Symbol in Programming Manager Programming Manager is where programmers "program" a Creston control system by assigning signals to symbols. The following diagram shows the TPS-3100 symbol in the SIMPL Windows' Programming Manager. Detail View of the TPS-3100 in SIMPL Windows' Programming Manager Digital Analog Serial NOTE: Join numbers are expandable to 4000 digital & analog, 999 serial. Signal Types Signals interconnect the various devices and logic symbols that comprise a SIMPL program. For any given signal, the signal type is determined by its driving source. That is, if the symbol that drives the signal has an analog output, then, by definition, the connecting signal is analog. 24 · 6. 4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L Operations Guide ­ DOC. 6291 Crestron Isys® TPS-3100L 6. 4" Lectern/Wall Mounted Touchpanel In SIMPL Windows, the signal types are color-coded as follows: Digital = Blue Analog = Red Serial = Black Undefined/Other = Green NOTE: "Other" signals are a combination of the three basic types (e. g. many symbols accept either analog or serial signals; the combination is shown as a green signal). [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]