User manual CRESTRON SER-1600

[. . . ] This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Crestron Series 1600 Wired Touchpanels Contents Series 1600 Wired Touchpanels 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The RS-232 Screen displays six baud rate buttons, labeled 110, 300, 1200, 9600, 19200, and 38400. The enabled baud rate is indicated with red text (for CT models) or gray text (for LC models). To bring back the Interface Submenu select the RETURN button, located at the bottom of the RS-232 Screen, after the baud rate has been set. To bring back the Setup Menu select the RETURN button, located at the bottom of the Interface Submenu, after interface parameters have been set. Sound Submenu Sound Submenu The SOUND button, located at the top right corner of the Setup Menu, is used to display the Sound Submenu, shown to the left. Confirmation of a button press on a touchpanel is acknowledged by an audible click assuming this feature is enabled. To enable this feature, verify that the KEYCLICK ON button is active (red for CT models or gray for LC models). Volume of the audible click is controlled with the VOLUME UP and VOLUME DOWN buttons. Select the RETURN button, located at the bottom of the Sound Submenu, after sound parameters have been set. SIMPLTM Windows Programming NOTE: VisionTools Pro-e (VT Pro-e) is a Windows compatible software package for creating Crestron touchpanel screen designs. Refer to "Software" on page 2 for additional details regarding VT Pro-e. SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use programming language that is completely integrated and compatible with all Crestron system hardware. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. SIMPL Windows is Crestron Electronics' software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. The next two subsections describe a sample SIMPL Windows program that utilizes a Series 1600 Touchpanel. The first subsection details how the sample program works with a textual description and block diagram. The second subsection provides a broad description of how to actually create the SIMPL Windows program. NOTE: The following description assumes that the reader has knowledge of SIMPL Windows. If not, please refer to the extensive help information provided with the software. A similar copy of this program is available from the Crestron ControlCD (version 6. 2 Operations & Installation Guide - DOC. 5836A SeriesSeries 1600 Wired Touchpanels · 11 Wired Touchpanels Crestron Series 1600 and later) or the Crestron FTP site (www. crestron. com). Search for the CT-1600. SMW project in the SIMPL Windows Example Base (on the CD) or the EXAMPLES Library (Downloads page of the FTP site). How the Program Works A basic Series 1600 Touchpanel SIMPL program is shown after this paragraph in block diagram form. For this example, the CT-1600 is the user interface in a control system containing a CNMSX-PRO. [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. [. . . ]